Spreadsheet Risks in Banks

No other industry perhaps handles such large volumes of critical financial data more than the banking industry. For decades now, spreadsheets have become permanent fixtures in the front-line reporting tool sets of banks, providing organised information when and where needed.

But as banks enter into a period of heightened credit risks, elevated levels of fraud, and greater regulatory scrutiny, many are wondering if continued reliance on spreadsheets is a wise decision for banks today.

The downfall of Lehman Brothers which eventually led to its filing for Chapter 11 bankruptcy protection on September 15, 2008, served as a wake up call for many institutions across the globe to make a serious examination of their own risk management practices. But would these reforms include evaluating the security of user developed applications (UDAs), the most common of which are spreadsheets, and putting specific guidelines as to when they can – or cannot be – used?

Banks and Spreadsheet Use

Banks have been known to utilise spreadsheets systems for many critical functions because most personnel are well-acquainted with them, and the freedom of being able to develop customised reports without needing to consult with the IT department offers flexibility and convenience. In fact, more than having a way to do financial budgeting and analysing customer profitability, even loan officers and trade managers have become reliant on spreadsheets for risk management reporting and for making underwriting decisions.

But there are more than a few drawbacks to using spreadsheets for these tasks, and the sooner bank executives realise these, the sooner they can adopt better solutions.

General Limitations

Spreadsheets are far from being data base systems and yet more often than not, they are expected to act as such, with figures constantly added and formulas edited to produce the presumably right set of reports.

In addition, data integrity is always a cause for concern as most values in spreadsheets are entered as manual inputs. Even the mere misplacement of a comma or a negative sign, or an inadvertent ?edit? to a formula can also be a source of significant changes in the outcome.

Confidentiality risk is also another drawback of the use of spreadsheets in banks as these tools do not have adequate?access controls to limit access to only authorised individuals. Pertinent financial information that fall into the wrong hands can lead to a whole new set of problems including the possibility of fraud.

Risks in Trading

For trading transactions, spreadsheets can prove to be of immense use – but only for small market volumes. As trade volumes increase and the types vary, spreadsheets are no longer a viable solution and may likely become more of a hindrance, with calculations taking longer in the face of bigger transaction amounts and growing transaction data.

And in trading, there is always the need for rigorous computational functions. Computing for the Value at Risk (VaR) for large portfolios for instance, is simply way beyond the capabilities of spreadsheets. Banks that persist in using them are increasing the risk of loss on those portfolios. Or, they can be opening up?opportunities for fraud?as Allied Irish Bank (in the case of John Rusnak – $690 million) learned the hard way.

Risks in Underwriting

Bankers who use spreadsheets as their main source of information for underwriting procedures also face certain limitations. Loan transactions require that borrowers? financial data be centralised and easily accessible to risk officers and lending officers involved in making decisions. With spreadsheets, there is no simple and secure way of doing that. Information can be pulled from different sources – individual tax returns, corporate tax documents, partnership documents, audited financial statements – hence there is difficulty in verifying that these reports adhere to underwriting policies.

Spreadsheet control and monitoring

Financial institutions which are having difficulty weaning themselves from the convenience and simplicity that spreadsheets offer are looking for possible control solutions. Essentially, they want to find ways that allow them to continue using these UDAs and yet somehow eliminate the?spreadsheet risks?and limitations involved.

Still, the debate goes back and forth on whether adequate control measures can be implemented on spreadsheets so that that the risks are mitigated. Many services have come forward to herald innovative solutions for better spreadsheet management. But at the end of the day, there really is no guarantee that such solutions would suffice.

More Spreadsheet Blogs


Spreadsheet Risks in Banks


Top 10 Disadvantages of Spreadsheets


Disadvantages of Spreadsheets – obstacles to compliance in the Healthcare Industry


How Internal Auditors can win the War against Spreadsheet Fraud


Spreadsheet Reporting – No Room in your company in an age of Business Intelligence


Still looking for a Way to Consolidate Excel Spreadsheets?


Disadvantages of Spreadsheets


Spreadsheet woes – ill equipped for an Agile Business Environment


Spreadsheet Fraud


Spreadsheet Woes – Limited features for easy adoption of a control framework


Spreadsheet woes – Burden in SOX Compliance and other Regulations


Spreadsheet Risk Issues


Server Application Solutions – Don’t let Spreadsheets hold your Business back


Why Spreadsheets can send the pillars of Solvency II crashing down

?

Advert-Book-UK

amazon.co.uk

?

Advert-Book-USA

amazon.com

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Check our similar posts

What Kanban can do for Call Centre Response Times

When a Toyota industrial engineer named Taiichi Ohno was investigating ways to optimise production material stocks in 1953, it struck him that supermarkets already had the key. Their customers purchased food and groceries on a just-in-time basis, because they trusted continuity of supply. This enabled stores to predict demand, and ensure their suppliers kept the shelves full.

The Kanban system that Taiichi Ohno implemented included a labelling system. His Kanban tickets recorded details of the factory order, the delivery destination, and the process intended for the materials. Since then, Ohno?s system has helped in many other applications, especially where customer demand may be unpredictable.

Optimising Workflow in Call Centres
Optimising workflow in call centres involves aiming to have an agent pick up an incoming call within a few rings and deal with it effectively. Were this to be the case we would truly have a just-in-time business, in which operators arrived and left their stations according to customer demand. For this to be possible, we would need to standardise performance across the call centre team. Moving optimistically in that direction we would should do these three things:

  • Make our call centre operation nimble
  • Reduce the average time to handle calls
  • Decide an average time to answer callers

When we have done that, we are in a position to apply these norms to fluctuating call frequencies, and introduce ?kanbanned? call centre operators.

Making Call Centre Operations Nimble
The best place to start is to ask the operators and support staff what they think. Back in the 1960?s Robert Townsend of Avis Cars famously said, ?ask the people ? they know where the wheels are squeaking? and that is as true as ever.

  1. Begin by asking technical support about downtime frequencies, duration, and causes. Given the cost of labour and frustrated callers, we should have the fastest and most reliable telecoms and computer equipment we can find.
  1. Then invest in training and retraining operators, and making sure the pop-up screens are valuable, valid, and useful. They cannot do their job without this information, and it must be at least as tech-savvy as their average callers are.
  1. Finally, spruce up the call centre with more than a lick of paint to awaken a sense of enthusiasm and pride. Find time for occasional team builds and fun during breaks. Tele-operators have a difficult job. Make theirs fun!

Reducing Average Time to Handle Calls
Average length of contact is probably our most important metric. We should beware of shortening this at the cost of quality of interaction. To calculate it, use this formula:

Total Work Time + Total Hold Time + Total Post Call Time

Divided By

Total Calls Handled in that Period

Share recordings of great calls that highlight how your best operators work. Encourage role-play during training sessions so people learn by doing. Publish your average call-handling time statistics. Encourage individual operators to track how they are doing against these numbers. Make sure your customer information is up to date. While they must confirm core data, limit this so your operators can get down to their job sooner.

Decide a Target Time to Answer Calls
You should know what is possible in a matter of a few weeks. Do not attempt to go too tight on this one. It is better to build in say 10% slack that you can always trim in future. Once you have decided this, you can implement your Kanban system.

Introducing Kanban in Your Call Centre Operation
Monitor your rate of incoming calls through your contact centre, and adjust your operator-demand metric on an ongoing basis. Use this to calculate your over / under demand factor. Every operator should know the value on this Kanban ticket. It will tell them whether to speed up a little, or slow down a bit so they deliver the effort the call rate demands. It will also advise the supervisor when to call up reserves.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
How Mid-South Metallurgical cut Energy Use by 22%

Mid-South in Murfreesboro, Tennessee operates a high-energy plant providing precision heat treatments for high-speed tools – and also metal annealing and straightening services. This was a great business to be in before the energy crisis struck. That was about the same time the 2009 recession arrived. In no time at all the market was down 30%.

Investors had a pile of capital sunk into Mid-South?s three facilities spread across 21,000 square feet (2,000 square meters) of enclosed space. Within them, a number of twenty-five horsepower compressors plus a variety of electric, vacuum and atmospheric furnaces pumped out heat 27/7, 52 weeks a year. After the company called in the U.S. Department of Energy for assistance, several possibilities presented.

Insulate the Barium Chloride Salt Baths

The barium chloride salt baths used in the heat treatment process and operating at 1600?F (870?C) were a natural choice, since they could not be cooled below 1200?F (650?C) when out of use without hardening the barium chloride and clogging up the system. The amount of energy taken to prevent this came down considerably after they covered and insulated them. The recurring annual electricity saving was $53,000.

Manage Electrical Demand & Power

The utility delivers 480 volts of power to the three plants that between them consume between 825- and 875-kilowatt hours depending on the season. Prior to the energy crisis Mid-South Metallurgical regarded this level of consumption as a given. Following on the Department of Energy survey the company replaced the laminar flow burner tips with cyclonic burner ones, and implemented a number of other modifications to enhance thermal efficiency further. The overall natural gas reduction was 20%.

Implement Large Scale Site Lighting Upgrade

The 24/7 nature of the business makes lighting costs a significant factor. Prior to the energy upgrade this came from 44 older-type 400-watt metal halide fixtures. By replacing these with 88 x 8-foot (2.5 meter) fluorescent fittings Mid-South lowered maintenance and operating costs by 52%

The Mid-South Metallurgical Trophy Cabinet

These three improvements cut energy use by 22%, reduced peak electrical demand by 21% and brought total energy costs down 18%. Mid-South continues to monitor energy consumption at each strategic point, as it continues to seek out even greater energy efficiency in conjunction with its people.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Saving Energy Step 4 – Breathing Life into the Project

Today we consider the fourth step on the road to energy saving, when we introduce key contributors who will pull it all together. We have been on quite a journey. We started by developing a management system and then followed up with practical improvements, while challenging the assumptions behind the energy bills we may have paid unchallenged in the past.

After we knock off the big-ticket savings, managing energy becomes a process of improvement characterised by smaller increments. Kaizen is the classic model and it includes everybody in the organization from the janitor to the CEO. I inverted the pyramid deliberately, because ideas deserve considering no matter where the originator parks in the company yard.

People ? our people ?are truly central to the process. Energy adds extra leverage to their efforts, keeps them warm in winter, cool in summer and powers up the ovens in the company canteen. They are brimming over with ideas because that is the nature of being human. The best managers are those who release this potential and participate in its flowering,

It is important not to threaten job security. So many savings-driven initiatives have ended in job losses that people on the shop floor automatically suspect another round. Shrinking carbon footprints is about making the world a better place for everyone. We become more effective when we turn ?increasing profit? into making the enterprise sustainable in itself.

Engaging employees is more than office circulars and speeches at the Christmas Party. Organizations are organic places where trust grows slowly but conflict can flare in a moment. Before involving your people in your energy ?kaizan? make sure your words and intentions overlap perfectly. You will be amazed at the power you unlock in your people.

The best way I know of doing this is through your health and safety structure, which then becomes your environment, health and safety structure EHS. As you explore this idea at safety committees you find these things overlap, in the sense of creating people-centric environments at work and home.

That said, there is no magic formula for achieving employee engagement. The fact that people universally want a cleaner planet is the power to tap into. One way to form a team is to create one artificially and give it a task. The other is to work together towards a shared objective. Which one do you prefer?

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Ready to work with Denizon?

Contact Us Today