Align IT Investments With Organization Goals

While some organisation leaders loathe spending on IT, a growing number are already convinced of the necessity of investing in it. Unfortunately, a substantial fraction of those convinced to pursue IT investments are misguided as to which initiatives are really contributory to reaching their organisation’s goals.

In the end, many of their purchases either end up underutilised or become white elephants altogether. There are also those difficult to spot – IT purchases that do become integrated into daily operations but have little effect on the organisation’s growth, positioning, profitability, or efficiency.

If a purchase is to cost your company a fortune, then its positive impact on established company objectives should reflect accordingly. But how would you know it would? You can’t hope to foresee all its benefits especially if the IT solution is still quite new to you.

Our job is not only to identify the strengths of an IT system but also to determine whether these strengths are at all useful to your organisation’s thrusts.

Basically, here’s what we’ll do:

  • Conduct a rigorous analysis of your organisation to determine the specific and overall impact of certain IT solutions. We’ll be looking for areas where the effects of IT can result in the most rapid reduction of costs and, at the same time, drive the organisation in the direction of its established goals.
  • Propose cohesive best-of-breed solutions in line with the results of our analysis. Our familiarity with the IT landscape and our extensive selection of contacts in the industry will allow us to conduct insightful picks from a vast field of choices.
  • Establish best practices to make sure IT investments are optimally utilised.
  • Perform periodic reviews to ensure practices and processes are still in line with the established goals.

Find out how we can increase your efficiency even more:

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Check our similar posts

Energy efficiency- succeed and benefit

Energy is neither created nor destroyed; it is only transformed. This being the law of conservation of energy, and given that the process of transforming energy is inefficient resulting in loss of usable energy in the process of transforming one form of energy into another form, Energy Efficiency finds a home.
Talking of Energy efficiency, think of how much useful energy can be obtained from a system or a particular technology. It is also about the use of technology that requires a lesser amount of energy to carry out the same task.

Energy efficiency is the responsibility of both demand side and supply side. Supply-side energy efficiency refers to a set of actions taken to ensure efficiency through the electricity supply chain. Supply side efficiency measures are about efficiency in electricity generation; be it operation and maintenance of existing equipment or upgrading existing equipment with state-of-the-art energy-efficient generating equipment.

The demand side energy efficiency on the other hand refers to the actions taken to use less/demand less energy. Think of less energy usage in relation to improvement of energy efficiency in buildings, solar water heaters, energy efficient lighting systems such as Compact Fluorescent Lamps, conducting energy audits to identify potential energy saving opportunities, efficient water heating systems and the list is endless.

Success of energy efficiency is a win ? win to YOU-ME-US – the energy consumers, to THEM the energy producers and suppliers and to our precious ENVIRONMENT.
Gain to energy suppliers: – Less energy usage and better energy usage patterns among consumers consequently reduces the customer load which reduces losses on the supply side. Less energy loss creates capacity on the system to serve more customers.

Gain to you-me-us: – Less energy usage and better energy usage patterns Benefits the customer through reduced Electricity bills / $ savings through lower bills.

Benefits to the environment: – Usage of less energy reduces use of fossil fuels, hence reduction in GHG emissions hence conserving our environment. Companies look at means to make rational use of their least efficient generating equipment. The objective is to improve the operation and maintenance of existing equipment or upgrade it with state-of-the-art energy-efficient technologies. Some companies have on-site electricity generation alternatives and thus tend to consider the supply side in addition to demand-side energy efficiency.

Six Sigma

Six Sigma has received much attention worldwide as a management strategy that is said to have brought about huge improvements and financial gains for such big-name companies as Allied Signal, General Electric (GE) and Motorola.

If you want to give your business the chance to attain the same resounding success, Six Sigma could be the method that will steer you towards that direction.

What is Six Sigma?

So what really is it? Six Sigma is a business management tool that was developed using the most effective quality improvement techniques from the last six decades. Basing its approach on discipline, verifiable data, and statistical calculations, Six Sigma aims to identify the causes of defects and eliminate them, thereby resulting in near-perfect products that meet or exceed customer’s satisfaction.

The core concept behind the Six Sigma method is that if an organisation can quantify the number of “defects” there are in a particular process, improvement activities can be implemented to eliminate them, and get as close to a “zero defects” scenario as possible. Defect here is defined as any process output that fails to meet customer specifications.

Six Sigma is also unique from other programs in that it calls for the creation of a special infrastructure of people within the organisation (“Champions“, “Black Belts“, “Green Belts“) who are to be expert in the methods.

Six Sigma Methodologies

When implementing Six Sigma projects, two methodologies are often employed. Although each method uses five phases each, these two are distinguished from each other using 5-letter acronyms and their specific uses.

DMAIC ? is the project methodology used to improve processes and maximise productivity of current business practices. The 5 letters stand for:

  • D ? Define (the problem)
  • M ? Measure (the main factors of the existing process)
  • A ??Analyse?(the information gathered to deter mine the causes of defects)
  • I ? Improve (the current process based on the analysis)
  • C ? Control (all succeeding processes so as to minimise additional defects)

DMADV – is the method most suitable if your business is looking to create new products or designs. The acronym stands for:

  • D ? Define (product goals as the consumer market demands)
  • M ? Measure (and identify product capabilities and risks)
  • A ??Analyse?(to create the best possible design)
  • D ? Design (the product or process details)
  • V ? Verify (the design)

How does Six Sigma differ from other quality programs?

If you think that Six Sigma is just another one of those business strategies that produce more hype than actual results, think again. Six Sigma uses three key concepts that sets it apart from other business management methods.

  • It is strictly a data-driven approach, where assumptions and guesswork do not figure in the decision making.
  • It focuses on achieving quantifiable financial results ? the bottom line ($) ? as much as giving emphasis on customer satisfaction.
  • It requires strong management leadership, while at the same time creating a role for every individual in the organisation.

Is Six Sigma right for your business?

While many other organisations such as Sony, Nokia, American Express, Xerox, Boeing, Kodak, Sun Micro-systems and many other blue chip companies have followed suit in adopting Six Sigma, the truth is, any company — whether you have a large manufacturing corporation, or a small business specialising in customer service.

Certainly, there is a lot more to Six Sigma than what you can probably absorb in one sitting or reading.

With our wide range of business management consultancy services, we can help you understand the Six Sigma method in the context of your business. We can also help you establish your improvement goals, set up your program, and train your own team of “champions” who can lead in implementing your Six Sigma goals.

Find out more about our Quality Assurance services in the following pages:

Telemetry and the Survival of the Human Species

Without moisture, plants die. Without fodder, the animal food chain collapses. This is why climate change is the greatest threat humankind faces. Crop management needs timely information regarding ambient conditions, and also in the soil itself. In dry areas, online knowledge of trends in rainfall, sunlight, wind speed, leaf moisture, air temperature, relative humidity and solar radiation are indicators of soil stress that can be deadly for plants, and everything that relies on them.

As climate change bites, the need to find solutions accelerates. Drones swoop across to monitor ambient conditions, while probes sunk into plants and the earth in which they grow transmit information to big data repositories for feedback to administrators. In Australia, a remarkable cattle farmer is applying the same approach to his herds.

Nuffield scholar Rob Cook has always been on the edgy side of things. He lost his mobility in a helicopter crash in 2008 patrolling farmland but that has not deterred him. If anything, it has freed his mind to explore the potential that telemetry offers farmers in Australia. He shared this potential with the young beef producers in Roma Australia recently, and here is a summary what he said.

Being wheelchair bound he had to shift from herding with cattle dogs to a more scientific approach. He bought a farm 230 miles / 370 kilometres inland from Brisbane in a warm, temperate climate with significant rainfall even in the driest months. He uses observant software that reports on critical issues like water levels indicating animal consumption, and supplementary water flows from a central irrigation channel.

He also monitors fodder sources for dryer months, and moisture levels in food stocks. Rob is committed to making every blade of grass count. ?We even have the ability to take a photo of the cattle when they are taking a drink of water,? he explains, and that provides valuable information regarding tick and fly infestation and overall condition.

None of this would be possible for Rob Cook without telemetry, which is the process of collecting data at remote points and transmitting it to receiving equipment for analysis. Independent farmers do not have equipment to fund these analytic resources on their own, and use big data resources in a cloud to obtain reports. ecoVaro is on top of current trends. Please speak to us when you need independent advice.

?

Ready to work with Denizon?

Contact Us Today