Authentication and Access Control

Threats to your data can come from external or internal sources.

  1. There are individuals who don’t have the authorisation but are driven by malicious intentions to gain access to certain information. This may refer to individuals who already belong to your organisation (but don’t have the necessary access rights) as well as those who don’t.
  2. There are individuals who have both the authorisation and, unfortunately, the malicious intentions over certain information.
  3. Finally, there are individuals who have the authorisation, no malicious intentions, but have accidentally exposed the information in question to those without the proper authority.

While curbing threats 2 and 3 would require other methods, threat #1 can be countered if the right authentication and access control systems are in place.

Here’s what we can do for you:

  • Work with your key personnel to determine who gets access to what.
  • Help you decide whether a single factor or a two-factor authentication (2FA) is appropriate for your organisation and recommend which factors are most suitable. Login methods may include but are not limited to the following:
    • biometric devices
    • Kerberos tickets
    • mobile phones
    • passwords
    • PKI certificates
    • proximity cards
    • smart cards
    • tokens
  • Install the necessary infrastructure needed for the factors chosen. For instance, if you opt to use biometrics, then biometric scanners will be installed. We’ll make sure that the authentication terminals are situated in places where achieving optimal traffic and work flow has been taken into consideration.

Other defences we’re capable of putting up include:

Check our similar posts

Key Steps to Complying with ESOS

Energy Savings Opportunity Scheme has already been launched. In fact, it is by now in its initial phase. However, many businesses are still not aware of the new scheme, especially those who are covered by the qualifications for ESOS. To help them understand what they need to do in compliance to the energy efficiency strategy, here are key steps they can follow along the way.

Measure Overall Energy Consumption

The first step to complying with ESOS is to make an initial estimate of the business? energy consumption. This includes measuring the use of electricity, renewable energy, combustible fuels and all other forms of energy consumed whether in buildings, transports and industrial processes.

Three important factors to consider are the measurement units used, the reference period and quality of data. Energy units, such as MWh and GJ, or energy expenditure costs should be applied. Business enterprises should also do the initial measurement within a reference period of 12 months. Moreover, data collected should be verifiable at hand.

Identify Areas of Significant Energy Consumption

When the total energy consumption for all the activities and assets has already been estimated, it’s then time to identify what areas in the organisation comprise the significant portion of the overall energy usage. The areas recognised should cover at least 90% of the overall consumption. Meaning to say, ESOS participants have the chance to omit 10% of the energy consumption and instead focus on the 90%. This would ensure that subsequent energy audits will be cost-effective and proportionate.

Consider and Choose Compliance Routes

In order to comply with ESOS, qualified businesses should consider what compliance routes to take. These routes include taking series of energy audits, operating and implementing a certified ISO 50001 energy management system, acquiring Display Energy Certificates (DECs) and working with Green Deal assessments. Whichever route the business takes, one should maintain credible evidences, along with helpful documents, to certify their compliance.

Report the Compliance

Except when the large enterprise covers all the significant areas of energy consumption by means of ISO 50001 certification, one should appoint a lead assessor to supervise, conduct and review the organisation’s chosen ESOS compliance route. In this case, the approved assessments should then be signed off at board level to ensure that the conclusions and recommendations for energy savings are properly carried. To confirm their compliance, the business should submit a formal notification to the Environment Agency.

Because ESOS is not just an opportunity but also an obligation, it designated compliance bodies and gave them the authority to file civil penalties towards those who fail to comply with the scheme. Not only that, these appropriate authorities have the right to publish information about non-compliant enterprises including their name, details of non-compliance and corresponding penalty amount. Among these UK compliance bodies are Natural Resources Wales, Environment Agency in England, The Scottish Environment Protection Agency (SEPA) and Northern Ireland Environment Agency.

So, if you are covered with the ESOS qualifications, make sure to be informed. As the famous saying goes, ?Ignorance of the law excuses no one.? Likewise, awareness of ESOS is a responsibility every large business in UK should give importance to.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Saving Energy Step 1 ? Implementing a Management System

There has been much hype down the years regarding whether management is art or science. Thankfully, where people are concerned the pendulum has swung away from standard times in sweatshops in the west. However, when it comes to measuring physical things like harvest per square meter and the amount of energy consumed there is no substitute for scientific measurement, and this implies a system.

Managing energy cost and consumption down is like any other strategy. American engineer / statistician / management consultant W. Edwards Demming may have passed on in 1993. However he was as right as ever when he said:

  1. When people and organizations focus primarily on quality, this tends to increase and costs fall over time.
  1. However, when people and organizations focus primarily on costs, costs tend to rise and quality declines over time.

Demming believed that 90% of organizational problems arise from systems we put in place ourselves. This can be because we are so accustomed to them that we fail to notice when they are no longer relevant. The currently prevailing laissez faire towards energy is a case in point. What is managed improves and what is not, deteriorates. We know this. Let us take a look at how to apply this principle to energy management.

First, you need to get the subject out the closet and talk about it. How often do you do this is your boardroom, and how does energy rank against other priorities? Good governance is about taking up a position and following through on it. Here is a handy checklist you may like to use.

  • Do we use a consistent language when we talk about energy? Is it electricity, or carbon emitted (or are we merely fretting over cost).
  • How well engaged are we as a company? Looking up and down and across the organization are there points where responsibility stops.
  • How well have we defined accountability? Do we agree on key performance areas and how to report on them.
  • Are we measuring energy use at each point of the business? When did we last challenge the assumption that ?we’re doing okay?.
  • Have we articulated our belief that quality is endless improvement, or are we simply chasing targets because someone says we should.

A management system is a program of policies, processes and methods to ensure achievement of goals. The next blog focuses on tools and techniques that support this effort.

Reduce Cost and Improve Productivity

Whether the economy is in a downturn or not, management will always aim for a more cost effective IT solution. If your current IT infrastructure is hurting your profitability, our expertise is both ‘tested and proven”.? Also “bleeding edge” solutions in the industry will enable us to find inexpensive alternatives for you.

For instance, have you started to wonder whether having a constantly growing number of servers, many of which are underutilised, is really the norm? Well, that used to be the case. However, with the advent of virtualisation and replication, that expensive exercise is steadily becoming a thing of the past.

By implementing solutions powered by these two technologies, organisations can now manage excess storage capacities and hardware resources by performing simpler processes at lesser costs. In addition to that, using the same pair of technologies, companies can also decrease the downtime suffered during maintenance and upgrades.

Thus, at the end of the day, not only do companies stand to reduce expenditures, they can also boost revenues as a result of increased productivity time.

Do we still have other IT solutions that tackle a different set of problems but arrive at the same outcome, i.e. reduced costs + improved productivity = higher profits? You bet we do.

Basically, this is how we’ll help your company arrive at the same winning formula:

  • Provide insights as to where and when changes have to be made. Oftentimes, initiatives to reduce cost and improve productivity are not preceded by the appropriate study especially as with regards to their impact on all departments in the organisation. This usually results in unnecessary duplication of resources, a sure way to increase costs instead.
  • Consolidate and automate. We’ll work within your budget in finding ways to consolidate your applications, hardware, storage, databases, and processes. Then we’ll integrate automation practices to simplify management and maintenance of all these assets. This will substantially free not only your IT infrastructure but also your IT staff, giving them more opportunities to innovate.
  • Create an innovative environment. One of the benefits you gain in having room to innovate is the potential to discover new ways to drive costs even further. A fraction of your savings can then be used to develop even better IT solutions, thus creating a productive cycle: IT solutions > savings and innovation > better IT solutions. Our role is to help you harness your potentials to keep that cycle running.
  • Work to reduce carbon footprint in all your procedures. By ensuring that energy consumption is brought to a minimum in every step you take, you can rest assured that costs have only one way to go – down. Check out our Energy Management Software ecoVaro.

Find out how we can increase your efficiency even more:

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Ready to work with Denizon?

Contact Us Today