Data Leakage Prevention – Protecting Sensitive Information

When DuPont lost $400 million in intellectual property, it wasn’t because a hacker from the other side of the world infiltrated their system. The information was simply stolen by a former employee. Alarmingly, data loss incidents are not always caused by deliberate actions.

A file containing personal information accidentally attached to an email and sent to multiple recipients; financial data stored in a USB pen drive, accidentally left in a restaurant; or bank account data of colleagues, inadvertently posted on a company website – these are also some of the everyday causes of data loss.

A report done by research company Infowatch regarding global data leaks in 2010 showed that there were actually more accidental data leaks in that year compared to intentional ones. Accidental leaks comprised 53%, while intentional leaks comprised 42% (the rest were unidentified).

But even if they ?only? happened accidentally, breach incidents like these can still be very costly. The tens of thousands of dollars that you could sometimes end up paying in civil penalties (as in the case when you lose other people?s personal information) can just be the beginning. More costly than this is the loss of customer and investor confidence. Once you lose those, you could consequently lose a considerable portion of your business.

Confidential information that may already be leaking out right under your nose

With all the data you collect, process, exchange, and store electronically every day, your IT system has surely now become a storehouse of sensitive information. Some of them, you may be even taking for granted.

But imagine what would happen if any of the following trade secrets fell into the wrong hands: marketing plans, confidential customer information, pricing data, product development strategies, business plans, supplier information, source codes, and employee salaries.

These are not the only kind of data that you should be worried about. You could also get into trouble if your sloppy IT security fails to protect employee or client personal information such as their names; social security numbers; drivers license numbers; or bank account numbers and credit/debit card numbers along with their corresponding PINs.

In some countries, you could face onerous data breach notification requirements and heavy fines when these kind of data are involved.

There are now more holes to plug

It’s not just the different varieties of sensitive electronic information that you have to worry about. Because these data can take on different forms, i.e. data-at-rest, data-in-motion, and data-at-the-endpoints, you also need to take aim at different areas in your IT system.

Sensitive information can be found ?at rest? in each of your employees? hard disks, in your servers, storage disks, and in off-site backup disks. They can also be found ?in motion? in email, instant messaging, social networking messaging, P2P file sharing, ftp, http, and so on.

That’s not all. Your highly mobile workforce may have already introduced yet another high-risk area into your system: data-at-the-endpoints. This includes USB flash-disks, laptops, portable hard disks, CDs, and even smartphones.

The main challenge of data leak prevention

Having been made aware of the various aspects of data leakage, have you already come to grips with the extent of the task at hand?

There are two major things you need to do here to prevent data leakage.

One, you need to identify what data you have that can be considered as sensitive/confidential information. Of course you have financial information and employee salaries in your files. But do you also store personally identifiable information? Do you have trade secrets that are stored in electronic form?

Two, you need to pinpoint their locations. Are they only on your hard disks and laptops? Or have they made their way to flash drives, CDs/DVDs, or portable HDDs? Are they being transmitted through email or any other file transfer media?

The reason why you need to know what your sensitive data are as well as where they are is because you would like all efforts of securing them to be as efficient and unobtrusive as possible.

Let’s say, as a way of protecting your data, you decide to implement encryption. Since encryption can consume a lot of storage space and significantly reduce performance, it may be impractical to encrypt your entire database or all your files. For the same reason, you wouldn’t want to encrypt every single email that you send.

Thus, the best way would be to encrypt only the data that really need encryption. But again, you need to know what data needs to be encrypted and where those data can be found. That alone is no simple task.

Not only will you need to deal with the data you already have, you will also have to worry about the data that will go through your systems during the course of your day-to-day transactions.

Identifying sensitive data as it enters or leaves your system, goes through your network, or gets stored in your file system or database, and then applying the necessary security actions should be done automatically and intelligently. Otherwise, you could end up spending on a lot of man-hours or, worse, wasting them on a lot of false positives and negatives.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Check our similar posts

Will UK Retailers Skim the Cream with ESOS?

The British Retail Consortium (BRC) was quick out on the starting blocks with an ambitious plan to cut energy costs by 25% in 5 years. Their ?25-in-5? initiative is chasing a target of ?4.4 billion savings during the duration. Part of this program involves ?cutting a path through a complex and inaccessible policy landscape?. BRC believes this drawback is making its members think twice about making energy efficiency investments.

The UK?s sprawling network of grocers, department stores and malls is the nation?s second most hungry energy customer, having spent ?3.3 billion on it in 2013 when it accounted for almost 20% of carbon released. If you think that sounds bad, it purchased double that amount in 2005. However the consortium believes there is still more to come.

It bases this assumption on the push effect of UK energy rates increasing by a quarter during the duration of the project. ?So it makes sense to be investing in energy efficiency rather than paying bills,? Andrew Bolitho (property, energy, and transport policy adviser) told Business Green. The numbers mentioned exclude third party transport and distribution networks not under the British Retail Consortium umbrella.

The ?complex and inaccessible policy landscape? is the reflection of UK legislators not tidying up as they go along. BRC cites a ?vast number of policies ? spreading confusion, undermining investment and making it harder to raise capital?. The prime culprits are Britain?s CRC Energy Efficient Scheme (previously Carbon Reduction Commitment) which publishes league tables and ESOS. Andrew Bolitho believes this duality is driving confused investors away.

The British Retail Consortium is at pains to point out that this is not about watering things down, but making it simpler for participating companies to report on energy matters at a single point. It will soon go live with its own information hub providing information for retailers wishing to measure consumption at critical points, assemble the bigger picture and implement best practice.

Ecovaro agrees with Andrew Bolitho that lowering energy demand and cutting carbon is not just about technology. We can do much in terms of changing attitudes and providing refresher training and this does not have to cost that much. Studies have shown repeatedly that there is huge benefit in inviting employees to cross over to our side. In fact, they may already be on board to an extent that may surprise.

What Heijunka is & How it Smooths Call Centre Production

The Japanese word Heijunka, pronounced hi-JUNE-kuh means ?levelling? in the sense of balancing workflows. It helps lean organizations shift priorities in the face of fluctuating customer demand. The goal is to have the entire operation working at the same pace throughout, by continuously adjusting the balance between predictability, flexibility, and stability to level out demand.

Henry Ford turned the American motor manufacturing industry upside down by mass-producing his iconic black motor cars on two separate production lines. In this photograph, body shells manufactured upstairs come down a ramp and drop onto a procession of cars almost ready to roll in 1913.

Smoothing Production in the Call Centre Industry

Call Centres work best in small teams, each with a supervisor to take over complex conversations. In the past, these tended to operate in silos with each group in semi-isolation representing a different set of clients. Calls came through to operators the instant the previous ones concluded. By the law of averages, inevitably one had more workload than the rest at a particular point in time as per this example.

Modern telecoms technology makes it possible to switch incoming lines to different call centre teams, provided these are multi-skilled. A central operator controls this manually by observing imbalanced workflows on a visual system called a Heijunka Box. The following example comes from a different industry, and highlights how eight teams share uneven demand for six products.

This departure from building handmade automobiles allowed Henry to move his workforce around to eliminate bottlenecks. For example, if rolls of seat leather arrived late he could send extra hands upstairs to speed up the work there, while simultaneously slowing chassis production. Ford had the further advantage of a virtual monopoly in the affordable car market. He made his cars at the rate that suited him best, with waiting lists extending for months.

A Modern, More Flexible Approach

Forces of open competition and the Six Sigma drive for as-close-to-zero defects dictates a more flexible approach, as embodied in this image published by the Six Sigma organisation. This represents an ideal state. In reality, one force usually has greater influence, for example decreasing stability enforces a more flexible approach.

Years ago, Japanese car manufacturer Toyota moved away from batching in favour of a more customer-centric approach, whereby buyers could customise orders from options held in stock for different variations of the same basic model. The most effective approach lies somewhere between Henry Ford?s inflexibility and Toyota?s openness, subject to the circumstances at the moment.

A Worked Factory Example

The following diagram suggests a practical Heijunka application in a factory producing three colours of identical hats. There are two machines for each option, one or both of which may be running. In the event of a large order for say blue hats, the company has the option of shifting some blue raw material to the red and green lines so to have the entire operation working at a similar rate.

Predictability, Flexibility, and Stability at Call Centre Service

The rate of incoming calls is a moving average characterised by spikes in demand. Since the caller has no knowledge whether high activity advisories are genuine, it is important to service them as quickly as possible. Lean process engineering provides technology to facilitate flexibility. Depending on individual circumstances, each call centre may have its own definition of what constitutes an acceptably stable situation.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Using Pull Systems to Optimise Work Flows in Call Centres

When call centres emerged towards the end of the 20th century, they deserved their name ?the sweatshops of the nineties?. A new brand of low-paid workers crammed into tiny cubicles to interact with consumers who were still trying to understand the system. Supervisors followed ?scientific management? principles aimed at maximising call-agent activity. When there was sudden surge in incoming calls, systems and customer care fell over.

The flow is nowadays in the opposite direction. Systems borrowed from manufacturing like Kanban, Pull, and Levelling are in place enabling a more customer-oriented approach. In this short article, our focus is on Pull Systems. We discuss what are they, and how they can make modern call centres even better for both sets of stakeholders.

Pull Systems from a Manufacturing Perspective

Manufacturing has traditionally been push-based. Sums are done, demand predicted, raw materials ordered and the machines turned on. Manufacturers send out representatives to obtain orders and push out stock. If the sums turn out wrong inventories rise, and stock holding costs increase. The consumer is on the receiving end again and the accountant is irritable all day long.

Just-in-time thinking has evolved a pull-based approach to manufacturing. This limits inventories to anticipated demand in the time it takes to manufacture more, plus a cushion as a trigger. When the cushion is gone, demand-pull spurs the factory into action. This approach brings us closer to only making what we can sell. The consumer benefits from a lower price and the accountant smiles again.

Are Pull Systems Possible in Dual Call Centres

There are many comments in the public domain regarding the practicality of using lean pull systems to regulate call centre workflow. Critics point to the practical impossibility of limiting the number of incoming callers. They believe a call centre must answer all inbound calls within a target period, or lose its clients to the competition.

In this world-view customers are often the losers. At peak times, operators can seem keen to shrug them off with canned answers. When things are quiet, they languidly explain things to keep their occupancy levels high. But this is not the end of the discussion, because modern call centres do more than just take inbound calls.

Using the Pull System Approach in Dual Call Centres

Most call centre support-desks originally focused are handling technical queries on behalf of a number of clients. When these clients? customers called in, their staff used operator?s guides to help them answer specific queries. Financial models?determined staffing levels and the number of ?man-hours? available daily. Using a manufacturing analogy, they used a push-approach to decide the amount of effort they were going to put out, and that is where they planted their standard.

Since these early 1990 days, advanced telephony on the internet has empowered call centres to provide additional remote services in any country with these networks. They have added sales and marketing to their business models, and increased their revenue through commissions. They have control over activity levels in this part of their business. They have the power to decide how many calls they are going to make, and within reason when they are going to make them.

This dichotomy of being passive regarding incoming traffic on the one hand, and having active control over outgoing calls on the other, opens up the possibility of a partly pull-based lean approach to call centre operation. In this model, a switching mechanism moves dual trained operators between call centre duties and marketing activities, as required by the volume of call centre traffic, thus making a pull system viable in dual call centres.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Ready to work with Denizon?

Contact Us Today