Authentication and Access Control

Threats to your data can come from external or internal sources.

  1. There are individuals who don’t have the authorisation but are driven by malicious intentions to gain access to certain information. This may refer to individuals who already belong to your organisation (but don’t have the necessary access rights) as well as those who don’t.
  2. There are individuals who have both the authorisation and, unfortunately, the malicious intentions over certain information.
  3. Finally, there are individuals who have the authorisation, no malicious intentions, but have accidentally exposed the information in question to those without the proper authority.

While curbing threats 2 and 3 would require other methods, threat #1 can be countered if the right authentication and access control systems are in place.

Here’s what we can do for you:

  • Work with your key personnel to determine who gets access to what.
  • Help you decide whether a single factor or a two-factor authentication (2FA) is appropriate for your organisation and recommend which factors are most suitable. Login methods may include but are not limited to the following:
    • biometric devices
    • Kerberos tickets
    • mobile phones
    • passwords
    • PKI certificates
    • proximity cards
    • smart cards
    • tokens
  • Install the necessary infrastructure needed for the factors chosen. For instance, if you opt to use biometrics, then biometric scanners will be installed. We’ll make sure that the authentication terminals are situated in places where achieving optimal traffic and work flow has been taken into consideration.

Other defences we’re capable of putting up include:

Check our similar posts

Making Click-and-Collect click

In my previous post, I introduced you to integrated e-commerce and explained why it is the right way to extend your business online. If you already have a brick-and-mortar retailing business and you’re looking to improve your online presence, you could start offering a click-and-collect service.

With click-and-collect, customers order online and then collect their merchandise from one of the retailer?s local branches. Why would they want to do that?

Apparently, there are buyers who now prefer a click-and-collect service over the delivery service of a purely online retailer. With the latter, they sometimes have to wait forever for the delivery van to arrive or contend with a missed-delivery card.

Basically, customers who want both the convenience of placing orders online and better control of their time find click-and-collect a better option.

Last December 2011, IMRG (Interactive Media in Retail Group) reported a ?significant rise in the percentage of click-and-collect e-retail sales in the 3rd quarter of 2011?. This accounted for 10.4% of all e-retail sales in that quarter. More specifically, the gain was 7.4%, which was also the strongest quarterly gain since IMRG started collecting this data.

Clearly, this particular service is gaining popularity. But how do you meet the rising demand in this area?

A click-and-collect service requires a highly synchronised ecosystem. You don’t want to have a customer order items from your online store, drive a couple of minutes from his house to your nearest outlet, only to find out that one of the items is no longer available.

This can only work if all systems involved are interconnected. Changes in the inventory in your individual outlets should reflect on your database in real time. In turn, these changes have to be reflected instantly on your online store. Conversely, once a buyer has picked items online and is already directed to a local outlet, those items have to be reserved there.

But that’s not all. Your system has to be seamless enough to support fast and reliable service. You don’t want your buyer to have to wait a long time before the items are ready for pick-up. It also has to be capable of tracking the status of ordered products, handling uncollected orders, and monitoring inventory.

By implementing an integrated e-commerce system, these won’t be the only things you?d be able to do. You can even add more value to your service. For example, you can connect to your CRM and learn more about your customers? purchase history, buying habits, and preferences.

That way, it would be easier for you to provide a faster and more convenient buying experience for them in the future.

Click-and-collect is a very promising way to increase your sales and improve customer loyalty.

IT Risk and Control Solutions Specialists – Why you need them more than ever

Over the years, the capabilities of IT systems have certainly grown by leaps and bounds. But so have the risks that accompany them. Countless threats to IT systems now exist that are capable of seriously disrupting business operations. That’s why companies have to conduct assessments aimed at making sure their systems are still capable of functioning effectively, efficiently, and securely all the time.

If you think you’ve been lucky enough to be spared from these threats, then maybe it’s because you haven’t conducted a risk assessment on your IT system recently. All too often, we hear of CIOs who believed their IT system was in tip-top condition, only to be later caught off-guard by a critical system breakdown that would eventually cripple their business for days or weeks.

More information assets to look after

If, before, you only had to worry about regular office applications, workstations, a LAN and a server, today’s varied and more sophisticated information assets are more challenging to maintain.

In addition to network operating systems, database management systems, content management systems, email systems, virtualization platforms, document management systems, business intelligence applications, and accounting software, a typical enterprise may also have to look after firewalls, intrusion detection systems, storage and backup systems, and data loss prevention systems, to mention a few.

These understandably require the services of experts spanning a wide range of skill sets.

Rising threats to corporate identity and privacy

Individuals are no longer just the ones being preyed upon by identity thieves. Businesses can now be subject to corporate identity theft as well. You could wake up one day finding your business already accused of carrying out illegal activities, a big chunk of your money gone, and your directors? seats already occupied by complete strangers.

To make things worse, corporate threats aren’t just coming from the outside.

Threats to corporate privacy, for instance, can come from within the organisation itself. Sensitive information like trade secrets and financial data are often leaked out (purposely or inadvertently) by employees. This is largely caused by the ever growing number of options for communications and transferring data (e.g. emails, instant messaging, blogs, social networking sites, ftp, P2P, etc.).

Greater challenges in designing, developing, and implementing policies and programs

Laws and regulations like SOX and Solvency II, which have direct impacts on IT, are on the rise. That is why corporate policies and programs now require sweeping changes. You now have to be more deliberate in integrating IT when establishing governance, internal controls, change management, incident management, and performance management.

A solid understanding on widely accepted frameworks and good practices like COBIT, COSO, and CMMI will help you considerably in such undertakings. Using these frameworks as guidelines will not only help you keep your policies and programs attuned to the times, they will also keep you in compliance with regulations.

Increasing demand for disaster recovery and business continuity capabilities

Every time you have a down time, you increase the probability of losing your customers to competitors. The longer the down time, the greater that probability becomes. Therefore, when a major disruption strikes, you should be able to recover at the soonest. If possible, you should be able to deliver products and services as usual.

This of course requires spending to increase your disaster recovery (DR) and business continuity (BC) capabilities. Are you ready for it? Migrating your IT infrastructure from traditional systems to the latest technologies that are better equipped for BC/DR requires careful planning and implementation to ensure an optimal return on investment.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Energy Management Tips

Energy management is of interest to various stakeholders; be it heads of facilities, heads of procurement, heads of environment and sustainability, financial officers, renewable energy managers and heads of energy. Some of the energy management tips that can be used to achieve considerable energy savings are:

1) Purchasing energy supplies at the lowest possible price

2) Managing energy use at peak efficiency

3) Utilising the most appropriate technology

1. Purchasing energy supplies at the lowest possible price
Purchasing energy supplies at the lowest possible price could be the starting point to great savings of energy costs. This can be achieved through switching your energy supplier. It is always advisable for companies to always take time to compare the energy tariffs to ensure they are on the best tariff and make great savings.

2. Managing energy use at peak efficiency

(a) Free help

There are some online tools that offer energy-efficiency improvements. These could come in handy in helping someone find out where to make energy-efficiency improvements.

(b) Energy monitors

An energy monitor is a gadget that estimate in real time how much energy you’re using. This can help one see where to cut back on energy consumption.

(c) Turning down thermostats

Turning down radiators especially in rooms that are rarely used/empty rooms or programming the heating to turn off when no one is there can go a long way in saving energy and energy costs.

(d) Use energy saving bulbs

Use of energy-saving light bulbs can cut down on energy usage drastically. Replacing all the light bulbs with energy-saving ones could make significant savings on energy usage and replacement costs since energy saving bulbs also have a longer life.

(e) Switching off unnecessary lights

It is also important to switch off lights that are not in use and to use the best bulb for the size of room.

(f) Sealing all heat escape routes

It is recommended that all gaps should be sealed in order to stop heat from escaping. Some of the heat escape routes are: windows, doors, chimneys and fireplaces, floorboards and skirting and loft hatches. The ways through which this can be achieved are:

? Windows- use of draught-proofing strips around the frame, brush strips work better for sash windows

? Doors – use of draught-proofing strips for gaps around the edges and brush or hinged-flap draught excluders on the bottom of doors

? Chimney and fireplace – inflatable cushions can be used to block the chimney or fit a cap over the chimney pot on fireplaces that are not used often

? Floorboards and skirting – Using a flexible silicon-based filler to fill the gaps

? Loft hatches – the use of draught-proofing strips can help to prevent hot air escaping
It is also important to consider smaller holes of air such as keyholes and letterboxes.

3. Utilising the most appropriate technology
Utilisation of technology as an energy management tool can be by way of choosing more energy efficient gadgets and by way of running technological gadgets in an energy efficient manner.

Ready to work with Denizon?

Contact Us Today