How FieldElite helps Plumbers

While most people think that running a plumbing business is a very easy job, things are a bit different on the ground. The job goes beyond the dropping by a client’s home and fixing a few pipes. In addition to the actual plumbing work, a plumbing business also involves managing quotes, invoicing customers, dispatching field service workers, and accounting, among others. Undertaking all these operations manually is extremely demanding. Besides the tedious work that it is, you’re likely to end up with a ton of errors. 

However, you can overcome these challenges by employing technology. The use of field service management software allows you to automate tasks. Consequently, you no longer have to deal with paperwork, delayed responses to customer requests, or double assignment of tasks.

If you’re wondering which field service management software to use, FieldElite is your best bet. FieldElite is feature-rich, and it gives you way more than the simple automation of the daily operations of your plumbing business.  

Below are some of the top benefits you’ll reap by using FieldElite to run your plumbing venture.  

Convenient Scheduling

Scheduling is an important aspect of the plumbing industry. Just like other field techs, plumbers would require tasks to be dispatched on time, which is only made possible by proper scheduling. With FieldElite, managers can easily schedule single and recurring tasks for the right plumber in a matter of seconds. 

On the other hand, plumbers can also view the available jobs and job information in the FieldElite easy to use App that’s available for Android, and confirm scheduled jobs. They can also accept these jobs using their smartphones and respond to service requests instantly.

Apart from getting the scheduled tasks, the FieldElite scheduling and dispatch feature is integrated with GPS functionality so that plumbers can get information on where to go next, and the optimal route to take from their mobile phones. 

The scheduling and dispatch feature also gives plumbers the information on the specific tools required for the job to allow them to get the tools in between appointments and schedules. 

Central Data Storage

Just like other field service industries, plumbing also involves big data. Handling data manually would mean more errors for your plumbing business, which will only impact negatively on your business. To eliminate such errors, go paperless with FieldElite. 

You can view everything from one place with FieldElite?s dashboard feature, including information about your plumbers and the scheduled tasks. On the other hand, your plumbers can access job details and the pending tasks from a central place. 

Plumbers can also get service requests from customers on the FieldElite mobile app from wherever they are. All the requests are stored in a central place, making the response to customer requests easier. The end result is satisfied customers, opening doors for return orders. 

In case of an update, all plumbers receive notifications at the same time and, where necessary, respond promptly to the requests. They can update the office instantly with job status changes from a central place. 

Convenient Reporting

Reporting is part of the tasks that plumbers have to do after completing the assigned job. As a manager, you expect your plumbers to keep you updated on the status of each assignment. Reporting on paper is time-consuming, and that’s why you need the services of FieldElite. 

With FieldElite reporting feature, sending over completed job reports is only a few clicks away. Plumbers can generate reports on the mobile app and keep the office staff updated on the status of the job. Using FieldElite, you can capture customer signatures and add attachments to the job status and send them instantly using the mobile app available on Android. 

Since they can do instant reporting via the mobile app, the plumbers can proceed to attend to new service requests as soon as they’re done without having to first come back to the office to submit their reports. 

Effective Communication

Timely communication is very essential if you’re working with field technicians. Since you’ll not always be with them in the field, it’s always important to establish a proper communication channel to ensure information reaches your plumbers in time. Here, you can get much more with FieldElite, including communication automation to remind customers of appointments.

With FieldElite field service management software, plumbers receive notifications through the mobile app. The notifications can be for anything from new task requests, requests for alterations, emergencies, and more. On the other hand, office-based staff gets to access the reports once the plumber completes their given task. 

That means the plumbers in the field and the office-based team gets communication instantly, enabling them to see and manage their workloads. For this reason, plumbers can complete multiple tasks within a short time, thus improving their overall productivity.

Scalability

The biggest question for most entrepreneurs when they want to buy management software is scalability. Businesses grow and incorporate new activities that would also require to be managed from a centralised system. Where that’s not possible, the business would have to move all their information from one system to a more robust one. 

With FieldElite, however, you’re safe. It works perfectly well for startups as well as large-sized plumbing businesses. It allows you to focus on the areas that your organisation covers now, but also lets you add new areas as you introduce them into your business. Moreover, FieldElite is also receiving regular updates to that bring it up-to-speed with new technologies and new ways of doing things, meaning that your business will be in a position to take advantage of the latest and more productive features. 

From the benefits mentioned above, it’s quite clear that your plumbing industry greatly needs the services of a field service management software. Your plumbers too need easier time working on their assigned tasks, adding to the reasons why you need to integrate FieldElite in your plumbing business.

Check our similar posts

Eck Industries Sheds Fresh Light

William Eck began his business in 1948 in a 650m2 garage building. The aluminium foundry prospered, and now has an 18,500m2 factory in Manitowoc, Wisconsin employing 250 people casting a variety of casings. Like high-tech industries around the globe it needs effective illumination. After it measured its carbon footprint, it realised it needed energy efficient lighting too.

When Eck Industries began its review it had around 360 high-pressure sodium lights throughout the plant. Their operating cost was substantial. After taking independent advice from an independent agency they realised they needed to replace these with more energy-efficient fluorescent lights that consume half as much energy.

The feasibility team conducted performance tests to determine the optimum solution. After selecting enclosed, gasketed and waterproof T8 fluorescents (available in G13 bipin, single pin and recessed double contacts) they collaborated with the supplier to calculate the best combination of 4 and 6 bulb fixtures.

The fittings they chose cost $60,000 plus $10,000 installation. However a $33,000 energy rebate wrote down 47% of this immediately. They achieved further energy savings by attaching motion sensors to lights over low-traffic walkways.

The retrofit was a huge success, with an 8 month payback via a direct operating saving of $55,000 a year. Over and above enhanced illumination Eck Industries slashed 674,000 kilowatt hours off its annual lighting bill. During the 20 year design life, this equates to a total 13.5 million kilowatt hours. Other quantifiable benefits include 443 tons less carbon, 2 tons less sulphur dioxide, and 1 ton less nitrogen oxide per year.

Many companies face similar opportunities but fail to capitalise on them for a number of reasons. These may include not being aware of what is available, lacking technical insight, being short of working capital and simply being too busy to focus on them.

Eck Industries got several things right. Firstly, they consulted an independent specialist; secondly they trusted their supplier to provide honest advice, and thirdly they accepted that any significant saving is worth chasing down. Other spin-offs were safer, more attractive working conditions and an opportunity to take their foot off the carbon pedal. This is an excellent example of what is possible when you try.

If you have measured your illumination cost and are concerned about it (but are unsure what the metric means within the bigger picture) then Ecovaro offers online reports comparing it with your industry average, and highlights the cost-benefits of alternative lighting. 

Will UK Retailers Skim the Cream with ESOS?

The British Retail Consortium (BRC) was quick out on the starting blocks with an ambitious plan to cut energy costs by 25% in 5 years. Their ?25-in-5? initiative is chasing a target of ?4.4 billion savings during the duration. Part of this program involves ?cutting a path through a complex and inaccessible policy landscape?. BRC believes this drawback is making its members think twice about making energy efficiency investments.

The UK?s sprawling network of grocers, department stores and malls is the nation?s second most hungry energy customer, having spent ?3.3 billion on it in 2013 when it accounted for almost 20% of carbon released. If you think that sounds bad, it purchased double that amount in 2005. However the consortium believes there is still more to come.

It bases this assumption on the push effect of UK energy rates increasing by a quarter during the duration of the project. ?So it makes sense to be investing in energy efficiency rather than paying bills,? Andrew Bolitho (property, energy, and transport policy adviser) told Business Green. The numbers mentioned exclude third party transport and distribution networks not under the British Retail Consortium umbrella.

The ?complex and inaccessible policy landscape? is the reflection of UK legislators not tidying up as they go along. BRC cites a ?vast number of policies ? spreading confusion, undermining investment and making it harder to raise capital?. The prime culprits are Britain?s CRC Energy Efficient Scheme (previously Carbon Reduction Commitment) which publishes league tables and ESOS. Andrew Bolitho believes this duality is driving confused investors away.

The British Retail Consortium is at pains to point out that this is not about watering things down, but making it simpler for participating companies to report on energy matters at a single point. It will soon go live with its own information hub providing information for retailers wishing to measure consumption at critical points, assemble the bigger picture and implement best practice.

Ecovaro agrees with Andrew Bolitho that lowering energy demand and cutting carbon is not just about technology. We can do much in terms of changing attitudes and providing refresher training and this does not have to cost that much. Studies have shown repeatedly that there is huge benefit in inviting employees to cross over to our side. In fact, they may already be on board to an extent that may surprise.

What Sub-Metering did for Nissan in Tennessee

When Nissan built its motor manufacturing plant in Smyrna 30 years ago, the 5.9 million square-foot factory employing over 8,000 people was state of art. After the 2005 hurricane season sky-rocketed energy prices, the energy team looked beyond efficient lighting at the more important aspect of utility usage in the plant itself. Let’s examine how they went about sub-metering and what it gained for them.

The Nissan energy team faced three challenges as they began their study. They had a rudimentary high-level data collection system (NEMAC) that was so primitive they had to transfer the data to spread-sheets to analyse it. To compound this, the engineering staff were focused on the priority of getting cars faster through the line. Finally, they faced the daunting task of making modifications to reticulation systems without affecting manufacturing throughput. But where to start?

The energy team chose the route of collaboration with assembly and maintenance people as they began the initial phase of tracking down existing meters and detecting gaps. They installed most additional equipment during normal service outages. Exceptions were treated as minor jobs to be done when convenient. Their next step was to connect the additional meters to their ageing NEMAC, and learn how to use it properly for the first time.

Although this was a cranky solution, it had the advantage of not calling for additional funding which would have caused delays. However operations personnel were concerned that energy-saving shutdowns between shifts and over weekends could cause false starts. ?We’ve already squeezed the lemon dry,? they seemed to say. ?What makes you think there?s more to come??

The energy team had a lucky break when they stumbled into an opportunity to prove their point early into implementation. They spotted a four-hourly power consumption spike they knew was worth examining. They traced this to an air dryer that was set to cyclical operation because it lacked a dew-point sensor. The company recovered the $1,500 this cost to fix, in an amazing 6 weeks.

Suitably encouraged and now supported by the operating and maintenance departments, the Smyrna energy team expanded their project to empower operating staff to adjust production schedules to optimise energy use, and maintenance staff to detect machines that were running without output value. The ongoing savings are significant and levels of shop floor staff motivation are higher.

Let’s leave the final word to the energy team facilitator who says, ?The only disadvantage of sub-metering is that now we can’t imagine doing without it.?

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Ready to work with Denizon?

Contact Us Today