How Mid-South Metallurgical cut Energy Use by 22%

Mid-South in Murfreesboro, Tennessee operates a high-energy plant providing precision heat treatments for high-speed tools – and also metal annealing and straightening services. This was a great business to be in before the energy crisis struck. That was about the same time the 2009 recession arrived. In no time at all the market was down 30%.

Investors had a pile of capital sunk into Mid-South?s three facilities spread across 21,000 square feet (2,000 square meters) of enclosed space. Within them, a number of twenty-five horsepower compressors plus a variety of electric, vacuum and atmospheric furnaces pumped out heat 27/7, 52 weeks a year. After the company called in the U.S. Department of Energy for assistance, several possibilities presented.

Insulate the Barium Chloride Salt Baths

The barium chloride salt baths used in the heat treatment process and operating at 1600?F (870?C) were a natural choice, since they could not be cooled below 1200?F (650?C) when out of use without hardening the barium chloride and clogging up the system. The amount of energy taken to prevent this came down considerably after they covered and insulated them. The recurring annual electricity saving was $53,000.

Manage Electrical Demand & Power

The utility delivers 480 volts of power to the three plants that between them consume between 825- and 875-kilowatt hours depending on the season. Prior to the energy crisis Mid-South Metallurgical regarded this level of consumption as a given. Following on the Department of Energy survey the company replaced the laminar flow burner tips with cyclonic burner ones, and implemented a number of other modifications to enhance thermal efficiency further. The overall natural gas reduction was 20%.

Implement Large Scale Site Lighting Upgrade

The 24/7 nature of the business makes lighting costs a significant factor. Prior to the energy upgrade this came from 44 older-type 400-watt metal halide fixtures. By replacing these with 88 x 8-foot (2.5 meter) fluorescent fittings Mid-South lowered maintenance and operating costs by 52%

The Mid-South Metallurgical Trophy Cabinet

These three improvements cut energy use by 22%, reduced peak electrical demand by 21% and brought total energy costs down 18%. Mid-South continues to monitor energy consumption at each strategic point, as it continues to seek out even greater energy efficiency in conjunction with its people.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Check our similar posts

What Kanban can do for Call Centre Response Times

When a Toyota industrial engineer named Taiichi Ohno was investigating ways to optimise production material stocks in 1953, it struck him that supermarkets already had the key. Their customers purchased food and groceries on a just-in-time basis, because they trusted continuity of supply. This enabled stores to predict demand, and ensure their suppliers kept the shelves full.

The Kanban system that Taiichi Ohno implemented included a labelling system. His Kanban tickets recorded details of the factory order, the delivery destination, and the process intended for the materials. Since then, Ohno?s system has helped in many other applications, especially where customer demand may be unpredictable.

Optimising Workflow in Call Centres
Optimising workflow in call centres involves aiming to have an agent pick up an incoming call within a few rings and deal with it effectively. Were this to be the case we would truly have a just-in-time business, in which operators arrived and left their stations according to customer demand. For this to be possible, we would need to standardise performance across the call centre team. Moving optimistically in that direction we would should do these three things:

  • Make our call centre operation nimble
  • Reduce the average time to handle calls
  • Decide an average time to answer callers

When we have done that, we are in a position to apply these norms to fluctuating call frequencies, and introduce ?kanbanned? call centre operators.

Making Call Centre Operations Nimble
The best place to start is to ask the operators and support staff what they think. Back in the 1960?s Robert Townsend of Avis Cars famously said, ?ask the people ? they know where the wheels are squeaking? and that is as true as ever.

  1. Begin by asking technical support about downtime frequencies, duration, and causes. Given the cost of labour and frustrated callers, we should have the fastest and most reliable telecoms and computer equipment we can find.
  1. Then invest in training and retraining operators, and making sure the pop-up screens are valuable, valid, and useful. They cannot do their job without this information, and it must be at least as tech-savvy as their average callers are.
  1. Finally, spruce up the call centre with more than a lick of paint to awaken a sense of enthusiasm and pride. Find time for occasional team builds and fun during breaks. Tele-operators have a difficult job. Make theirs fun!

Reducing Average Time to Handle Calls
Average length of contact is probably our most important metric. We should beware of shortening this at the cost of quality of interaction. To calculate it, use this formula:

Total Work Time + Total Hold Time + Total Post Call Time

Divided By

Total Calls Handled in that Period

Share recordings of great calls that highlight how your best operators work. Encourage role-play during training sessions so people learn by doing. Publish your average call-handling time statistics. Encourage individual operators to track how they are doing against these numbers. Make sure your customer information is up to date. While they must confirm core data, limit this so your operators can get down to their job sooner.

Decide a Target Time to Answer Calls
You should know what is possible in a matter of a few weeks. Do not attempt to go too tight on this one. It is better to build in say 10% slack that you can always trim in future. Once you have decided this, you can implement your Kanban system.

Introducing Kanban in Your Call Centre Operation
Monitor your rate of incoming calls through your contact centre, and adjust your operator-demand metric on an ongoing basis. Use this to calculate your over / under demand factor. Every operator should know the value on this Kanban ticket. It will tell them whether to speed up a little, or slow down a bit so they deliver the effort the call rate demands. It will also advise the supervisor when to call up reserves.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
The Future of Cloud Backup and Recovery

We came across a post on Docurated that pulled together thirty-seven suggestions for the top cloud storage mistakes user companies make. Given that cloud storage seems to be the best backup solution for now at least, we decided to turn these ideas around to sense the direction cloud backup and recovery needs to take, if it is still to be relevant in say ten years? time.

Has Cloud Storage Largely Saturated the West?
It probably has. Outside of major corporates who make their own arrangements ? and SME?s that use free services by email providers ? the middle band of companies in Europe and America have found their service providers, although they may have never tested the recovery process, to see if it works.

The new gold rush in the cloud backup and recovery business is, or should be emerging markets in Asia, Africa, South America, and the Middle East. There, connectivity is brittler than over here. To be relevant in these fragile, more populous areas our cloud backup and recovery industry need to be more agile and nimble.

? It must provide a simpler service emerging commerce can afford, refresh its user interfaces in third world languages, have more accessible help, and be patient to explain how cloud storage works to newbies. In other words, it must source its call centre operators in the areas it serves.

? It must adapt to local connectivity standards, and stop expecting someone with ADSL broadband to keep up with cloud server networks running at up to 1GBPS compared to their 10MBPS at best. For user sourcing and retention purposes, these new cloud backup and recovery services must be the ones who adapt.

? It must facilitate disaster recovery simulations among its clients in calmer moments when things are going well. Are they backing up the right files, are they updating these, and are their brittle ADSL networks able to cope with their cloud service providers? upload and download speeds?

? It must develop lean and agile systems slim enough to accommodate a micro client starting out, but sufficiently elastic to transfer them seamlessly to big data performance. The Asian, African, South American, and Middle Eastern regions are volume driven, and individual economies of scale are still rare.

? It must not expect its users to know automatically what they need, and be honest to admit that Western solutions may be wrong-sized. Conversion funnels in the new gold rush are bound to be longer. Engagements there depend on trust, not elevator sales letters. Our competition in these countries already works this way.

? It must be honest and admit cloud storage is only part of the solution. To recruit and retain users it must step back to 1983, when Compuserve offered its customers 128k of disc space, and spent an amount of effort explaining how to filter what to put there.

Cloud Storage of Data is Only One Part of the Solution
Governance reports and stock certificates burn just as easily as do servers in a fire. We must not transfer bad habits to exciting new markets. We close this article with the thoughts of John Howie, COO of Cloud Security Alliance, as reported in the Docurated post we mentioned, and these apply across the globe, we believe.
There is no single most important thing to carry forward into the future of cloud backup and recovery. We must be mindful when moving data that this can be fragile too. We must also create layers of backup the way insurance companies re-insure, that make any one cloud backup and recovery business redundant if it happens.
We hold the trust of our customers in our hands but trust is delicate too. We must cease trying to make a pile of money quickly, and become more interested in ensuring that data transferred back and forth is synchronised. The cloud backup and recovery industry needs only one notorious mistake, to become redundant itself in the ten years we mentioned.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Making Click-and-Collect click

In my previous post, I introduced you to integrated e-commerce and explained why it is the right way to extend your business online. If you already have a brick-and-mortar retailing business and you’re looking to improve your online presence, you could start offering a click-and-collect service.

With click-and-collect, customers order online and then collect their merchandise from one of the retailer?s local branches. Why would they want to do that?

Apparently, there are buyers who now prefer a click-and-collect service over the delivery service of a purely online retailer. With the latter, they sometimes have to wait forever for the delivery van to arrive or contend with a missed-delivery card.

Basically, customers who want both the convenience of placing orders online and better control of their time find click-and-collect a better option.

Last December 2011, IMRG (Interactive Media in Retail Group) reported a ?significant rise in the percentage of click-and-collect e-retail sales in the 3rd quarter of 2011?. This accounted for 10.4% of all e-retail sales in that quarter. More specifically, the gain was 7.4%, which was also the strongest quarterly gain since IMRG started collecting this data.

Clearly, this particular service is gaining popularity. But how do you meet the rising demand in this area?

A click-and-collect service requires a highly synchronised ecosystem. You don’t want to have a customer order items from your online store, drive a couple of minutes from his house to your nearest outlet, only to find out that one of the items is no longer available.

This can only work if all systems involved are interconnected. Changes in the inventory in your individual outlets should reflect on your database in real time. In turn, these changes have to be reflected instantly on your online store. Conversely, once a buyer has picked items online and is already directed to a local outlet, those items have to be reserved there.

But that’s not all. Your system has to be seamless enough to support fast and reliable service. You don’t want your buyer to have to wait a long time before the items are ready for pick-up. It also has to be capable of tracking the status of ordered products, handling uncollected orders, and monitoring inventory.

By implementing an integrated e-commerce system, these won’t be the only things you?d be able to do. You can even add more value to your service. For example, you can connect to your CRM and learn more about your customers? purchase history, buying habits, and preferences.

That way, it would be easier for you to provide a faster and more convenient buying experience for them in the future.

Click-and-collect is a very promising way to increase your sales and improve customer loyalty.

Ready to work with Denizon?

Contact Us Today