Business Turnaround Tip for a Successful MBO Turned Awry

When you acquire a company through an MBO, your hopes are always high. You know the business more than anyone else and you’ve got too much at stake to do a sloppy job. So how could things go wrong? Well sometimes they do. And if you don’t make a quick business turnaround, you could end up losing more than just your company.

If that management buyout was financed by a bank, then chances are you were required to invest a sizeable amount from your own pockets. I won’t be surprised if you even remortgaged your house for it.

Regardless of your source of funding, whether it was a bank, a venture capitalist or through a deferred consideration, the mere thought of losing your job and getting buried in enormous debt at the same time might be too much to bear. If you get too overwhelmed by your emotions and can’t think clearly, you’ll have to step out of the driver?s seat and have someone take over.

That someone can’t be a member of the management team that took part in the management buyout. Like you, he/she might be in panic mode as well. You need someone from the outside who has no emotional attachments to the company and hence can view the crisis from a clear perspective.

Here’s what’s needed:

Review and Plan

Take a closer look at all factors affecting your business: governance and organisational structures, employees, suppliers, systems and procedures, roles and responsibilities, etc. Identify potential risks and assess the likelihood of them affecting your business.

This will give a clearer picture of cause-and-effect relationships as well as the specific tasks on hand.

Thus, when it is time to draft a plan, you can do so from a well-informed standpoint. This will enable you to target specific areas of improvement and avoid pointless activities.

Assure all stakeholders

Once a watertight plan has been formulated, you will have to approach your stakeholders. They?ll need to know what your directions are. Once they’re all sold on the plan, you could implement our strategies unimpeded.

This is a very crucial part because a sceptical stakeholder can serve as a major stumbling block in our efforts to improve the situation. You need to convince your banks, sponsors, and investors in order to avoid additional financial obstacles. You need to convince your suppliers too. If they cut off or limit supply, you won’t be able to continue doing business.

Most of all, you need to persuade your staff and employees that the proposed major changes have to be carried out in order for the company to survive. You can’t run your operations without them on board.

Redesign and set up new systems and procedures

Any company requiring a turnaround will certainly have systems and procedures that are no longer working well in the current conditions and hence would require either major changes in key areas or a total revamp. You need to study personnel roles and responsibilities as well as systems and processes, including financial and IT systems, and supervise the implementation of necessary changes.

You will need to evaluate your existing IT architecture and determine how you can best maximise what you already have and propose what you think will work more efficiently for our proposed systems and procedures. Every piece of hardware or software recommended will take into consideration your present resources. There are many solutions out there, you just need to find the best fit.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Check our similar posts

ESOS What is the Truth?

When the UK administration introduced its ESOS Energy Savings Opportunity Scheme reactions from business people followed a familiar theme.

  • Do nothing it will go away
  • The next Westminster will drop this
  • Another stealth tax. I don’t have time for this
  • Give the problem to admin and tell them to fix it

ecovaro decided to share three facts with you. These are

(1) ESOS is not a government money spinner

(2) all major political parties support it, and

(3) it is a cost-effective way to put money back in your pocket while feeling better about what business pumps into the environment.

Four More ESOS Facts

1. You Cannot Give the Problem to Admin ? Energy is technical. The lead belongs with your operations staff because they understand how your systems work. Some things are best outsourced though. ecovaro is here to help.

2. ESOS is Not Going to Go Away ? A company inside the regulation net must submit its first report by 6 December 2015. Non-compliance risks the following penalties:

  • ?5,000 for not maintaining adequate records
  • ?50,000 for not completing the assessment
  • ?50,000 for making a false or misleading statement

3. The Employee Count is the Annual Average – The employment criteria (unlike balance sheet and turnover) is the monthly average of full and part-time employees taken across the full financial year. The fact you have <250 employees in December 2015 when the first report is due does not necessarily let you off the hook.

4. The 6 December 2014 Report is No Big Deal ? When you think about it the administration is hardly likely to spend years wading through 9,000 detailed company energy plans. It has no authority to comment in any case. All that is required is for a senior director to confirm reading the document, and a lead assessor to agree it complies with the law.

Does this mean that ESOS is a damp squib? We do not think so, although some firms may take the low road. ecovaro believes the financial benefits will carry the process forward, and that the imperative to make the world a better place will do the rest.

What Heijunka is & How it Smooths Call Centre Production

The Japanese word Heijunka, pronounced hi-JUNE-kuh means ?levelling? in the sense of balancing workflows. It helps lean organizations shift priorities in the face of fluctuating customer demand. The goal is to have the entire operation working at the same pace throughout, by continuously adjusting the balance between predictability, flexibility, and stability to level out demand.

Henry Ford turned the American motor manufacturing industry upside down by mass-producing his iconic black motor cars on two separate production lines. In this photograph, body shells manufactured upstairs come down a ramp and drop onto a procession of cars almost ready to roll in 1913.

Smoothing Production in the Call Centre Industry

Call Centres work best in small teams, each with a supervisor to take over complex conversations. In the past, these tended to operate in silos with each group in semi-isolation representing a different set of clients. Calls came through to operators the instant the previous ones concluded. By the law of averages, inevitably one had more workload than the rest at a particular point in time as per this example.

Modern telecoms technology makes it possible to switch incoming lines to different call centre teams, provided these are multi-skilled. A central operator controls this manually by observing imbalanced workflows on a visual system called a Heijunka Box. The following example comes from a different industry, and highlights how eight teams share uneven demand for six products.

This departure from building handmade automobiles allowed Henry to move his workforce around to eliminate bottlenecks. For example, if rolls of seat leather arrived late he could send extra hands upstairs to speed up the work there, while simultaneously slowing chassis production. Ford had the further advantage of a virtual monopoly in the affordable car market. He made his cars at the rate that suited him best, with waiting lists extending for months.

A Modern, More Flexible Approach

Forces of open competition and the Six Sigma drive for as-close-to-zero defects dictates a more flexible approach, as embodied in this image published by the Six Sigma organisation. This represents an ideal state. In reality, one force usually has greater influence, for example decreasing stability enforces a more flexible approach.

Years ago, Japanese car manufacturer Toyota moved away from batching in favour of a more customer-centric approach, whereby buyers could customise orders from options held in stock for different variations of the same basic model. The most effective approach lies somewhere between Henry Ford?s inflexibility and Toyota?s openness, subject to the circumstances at the moment.

A Worked Factory Example

The following diagram suggests a practical Heijunka application in a factory producing three colours of identical hats. There are two machines for each option, one or both of which may be running. In the event of a large order for say blue hats, the company has the option of shifting some blue raw material to the red and green lines so to have the entire operation working at a similar rate.

Predictability, Flexibility, and Stability at Call Centre Service

The rate of incoming calls is a moving average characterised by spikes in demand. Since the caller has no knowledge whether high activity advisories are genuine, it is important to service them as quickly as possible. Lean process engineering provides technology to facilitate flexibility. Depending on individual circumstances, each call centre may have its own definition of what constitutes an acceptably stable situation.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Ready to work with Denizon?

Contact Us Today