Recognizing Your Carbon Footprint

Countless times we have heard of the term ?carbon footprint?. Perhaps we have seen and heard it on TV or read it in newspapers, magazines and published articles. Indeed, it has been an expression familiar to everyone as it is always associated with climate change, carbon emissions, global warming, pollution and other environmental issues. Carbon footprint is real. It exists and, in fact, continues to affect the world we live in.

Defining Carbon Footprint

Two essential words comprise the term carbon footprint. Fundamentally, ?carbon? means the carbon dioxide circulating in the atmosphere. It is also the general word used for other greenhouse gasses emitted into the air. On the other note, ?footprint? refers to impact or effect.

Think about the footprints people leave on the beach sand upon walking on the shore. That is exactly what carbon footprint is like. It’s about the impact humans leave on the earth in the form of carbon dioxide and other greenhouse gases.

Calculating Your Personal Carbon Footprint

The food we eat, products we use, vehicles we ride on and electricity we consume emit carbon dioxide. In fact, our activities, lifestyle, homes, and countries contribute to climate change. And carbon footprint is the best estimate we can get of the full impact our doings affect the earth. It quantifies the amount of our carbon emission. With this, knowing how to calculate your personal carbon footprint is important.

There are various standards in calculating one?s carbon footprint. There is the so-called ?lifestyle assessment? and the input-output analysis. Lifestyle assessment works by adding up all the feasible emission pathways while the input-output analysis involves determining the total emissions of a particular country, dividing it by the carbon-emitting sectors and estimating the overall emissions of each sector. The input-output analysis makes sure that no emission pathway is missed out.

Calculating your carbon footprint manually is an effective way for you to understand your emissions better. You just need a lot of patience to learn how each footprint is generated. Moreover, there are also several resources online that can help you calculate your carbon footprint. Online carbon calculators are abundant across the web. To make your life simpler, you can opt to try those online calculators and easily determine your carbon emissions. However, such calculators vary in scope. So make sure that the online carbon calculator, you choose, is one that?includes emissions both direct and indirect.

Avoiding Toe Prints

A toe print is a portion of a footprint. Sometimes, people are misled in their calculations because they only get a carbon toe print instead of a footprint. The idea is that, you should cover a smart scope of your carbon emissions. Not only measuring a portion, but the whole.

Say for example, running a conventional car. The carbon emitted from the car is not only the fuel combustion from the diesel or petrol.? Likewise, the carbon released as the gas was processed and transported to your nearby gasoline station is also an addition to your carbon footprint. If you do not understand this, you will end up calculating your direct emissions while neglecting the indirect ones.

Be wise in calculating your carbon footprint. And when in doubt, whether you are an individual or a business entity, you should seek help from experts who can do it right.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Check our similar posts

How to be cleaner and greener indoors

The supply of water on planet earth is finite hence the need to conserve this precious resource. Water is a utility that is often used in and outdoors and for that reason, water conservation activities should be undertaken everywhere.

Get greener everywhere
Water saving can be achieved through various ways. Of utmost importance, fixing leaks should be undertaken in all areas. Small household leaks can add up to gallons of water lost every day. It is therefore important to check all water system fixtures and ensure that there are no leakages.

Greener bathroom habits
Turning off taps- this should be practised in the bathroom especially while shaving and brushing teeth. One could also consider using showers instead of baths since showers use less water and get into the habit of taking shorter showers.

Clean and green dishes
The kitchen is one of the areas where a lot of water is used. Some of the ways through which water can be conserved in the kitchen are:

  • Use of basins when washing dishes by hand
  • Using a dishwasher – when using the dish washer, it is important to make sure it’s fully loaded. Scraping plates instead of rinsing before loading it into the dishwasher will also go a long way in the conservation of the valuable commodity called water

Green your laundry and earn green bucks
The other area where water saving can be made is the laundry room. Washing only full loads of laundry will ensure that your washing machine is running at full efficiency hence you will be able to maximise your washer for energy efficiency. Always ensure you use the appropriate water level or load size selection on the washing machine. All these will not only save water but energy too and since savings are earnings you can smile all the way to the bank where some green bucks will be credited to your account.

2015 ESOS Guidelines Chapter 6 – Role of Lead Assessor

The primary role of the lead assessor is to make sure the enterprise?s assessment meets ESOS requirements. Their contribution is mandatory, with the only exception being where 100% of energy consumption received attention in an ISO 50001 that forms the basis of the ESOS report.

How to Find a Lead Assessor

An enterprise subject to ESOS must negotiate with a lead assessor with the necessary specialisms from one of the panels approved by the UK government. This can be a person within the organisation or an third party. If independent, then only one director of the enterprise need countersign the assessment report. If an employee, then two signatures are necessary. Before reaching a decision, consider

  • Whether the person has auditing experience in the sector
  • Whether they are familiar with the technology and the processes
  • Whether they have experience of auditing against a standard

The choice rests on the enterprise itself. The lead assessor performs the appointed role.

The Lead Assessor?s Role

The Lead Assessor?s main job is reviewing an ESOS assessment prepared by others against the standard, and deciding whether it meets the requirements. They may also contribute towards it. Typically their role includes:

  • Checking the calculation for total energy consumption across the entire enterprise
  • Reviewing the process whereby the 90% areas of significant consumption were identified
  • Confirming that certifications are in place for all alternate routes to compliance chosen
  • Checking that the audit reports meet the minimum criteria laid down by the ESOS system

Note: A lead assessor may partly prepare the assessment themselves, or simply verify that others did it correctly.

In the former instance a lead assessor might

  • Determine energy use profiles
  • Identify savings opportunities
  • Calculate savings measures
  • Present audit findings
  • Determine future methodology
  • Define sampling methods
  • Develop audit timetables
  • Establish site visit programs
  • Assemble ESOS information pack

Core Enterprise Responsibilities

The enterprise cannot absolve itself from responsibility for good governance. Accordingly, it remains liable for

  • Ensuring compliance with ESOS requirements
  • Selecting and appointing the lead assessor
  • Drawing attention to previous audit work
  • Agreeing with what the lead assessor does
  • Requesting directors to sign the assessment

The Environment Agency does not provide assessment templates as it believes this reduces the administrative burden on the enterprises it serves.

What Sub-Metering did for Nissan in Tennessee

When Nissan built its motor manufacturing plant in Smyrna 30 years ago, the 5.9 million square-foot factory employing over 8,000 people was state of art. After the 2005 hurricane season sky-rocketed energy prices, the energy team looked beyond efficient lighting at the more important aspect of utility usage in the plant itself. Let’s examine how they went about sub-metering and what it gained for them.

The Nissan energy team faced three challenges as they began their study. They had a rudimentary high-level data collection system (NEMAC) that was so primitive they had to transfer the data to spread-sheets to analyse it. To compound this, the engineering staff were focused on the priority of getting cars faster through the line. Finally, they faced the daunting task of making modifications to reticulation systems without affecting manufacturing throughput. But where to start?

The energy team chose the route of collaboration with assembly and maintenance people as they began the initial phase of tracking down existing meters and detecting gaps. They installed most additional equipment during normal service outages. Exceptions were treated as minor jobs to be done when convenient. Their next step was to connect the additional meters to their ageing NEMAC, and learn how to use it properly for the first time.

Although this was a cranky solution, it had the advantage of not calling for additional funding which would have caused delays. However operations personnel were concerned that energy-saving shutdowns between shifts and over weekends could cause false starts. ?We’ve already squeezed the lemon dry,? they seemed to say. ?What makes you think there?s more to come??

The energy team had a lucky break when they stumbled into an opportunity to prove their point early into implementation. They spotted a four-hourly power consumption spike they knew was worth examining. They traced this to an air dryer that was set to cyclical operation because it lacked a dew-point sensor. The company recovered the $1,500 this cost to fix, in an amazing 6 weeks.

Suitably encouraged and now supported by the operating and maintenance departments, the Smyrna energy team expanded their project to empower operating staff to adjust production schedules to optimise energy use, and maintenance staff to detect machines that were running without output value. The ongoing savings are significant and levels of shop floor staff motivation are higher.

Let’s leave the final word to the energy team facilitator who says, ?The only disadvantage of sub-metering is that now we can’t imagine doing without it.?

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Ready to work with Denizon?