IT Systems Implementation

Are you ready to find out how your newly accepted IT system fares in the real world? Although a rigorous Acceptance testing process can spot a wide spectrum of flaws in a newly constructed IT system, there is no way it can identify all possible defects. The moment the IT system is delivered into the hands of actual end users and other stakeholders, it is effectively stepping out of a controlled and secure environment.

Thus, it is during this phase wherein issues having direct impact on the business can arise.

It is our duty to ensure that the Systems Implementation phase is carried out as thoroughly, professionally, and efficiently as possible.

Thoroughly, because we need to include all relevant data and other deliverables, eliminate hard-to-detect miscalculated results, and substantially reduce the probability of business and mission critical issues popping up in the future;

Professionally, because it is the best way to address the sensitive process of turning over a new system to users who have gotten used to the old one;

And efficiently, because we want to minimise the duration over which all stakeholders have to adapt to the new system and allow them to move on to the process of growing the business.

Preparation

Louis Pasteur once said, “Luck favours the mind that is prepared.”

While we certainly won’t leave anything to chance, we do put substantial weight on the Preparation stage of Systems Implementation. We’re so confident with the strategies we employ in Preparation, that we can assure you of an utterly seamless Deployment and Transition phase.

By this we mean that issues that may arise during Deployment and Transition will be handled smoothly and efficiently because your people will know exactly what to do.

Here’s how we will prepare your organisation for Deployment:

  • Identify all key players for the Systems Implementation phase and orient them on their specific roles. We’ll make sure they know what possible hitches may come their way and how to deal with them.
  • Identify all end users and their corresponding functions, then assign appropriate access rights.
  • Draw multi-layered contingency plans to capture and address each possible concern that may crop up during Deployment.
  • Prepare a systematic step-by-step procedure and checklist for the entire Deployment stage. Both of them should have been copied from a similar procedure and checklist used in the Acceptance testing phase.
  • Make all stakeholders understand the conditions required before Deployment can commence.
  • Set the appropriate environment so that all stakeholders know what to expect and when to expect them the moment Deployment commences.
  • Prepare Technical Services and Technical Support personnel for the gruelling mission ahead.
  • Make sure all communication processes are well coordinated so that everyone affected will know who to contact and how to get in touch with them when a problem arises.
  • Plan and schedule training sessions so that they can be conducted “just in time”. Training sessions conducted way ahead of Deployment are often useless because the trainees tend to forget about what they learned when the time comes to apply them. Similarly, training sessions conducted way after Deployment also become useless because trainees are seldom able to internalise instructions delivered during crash courses.

Deployment

There are two sets of issues to keep an eye on during Deployment:

  1. Issues directly related to the technology itself, e.g. application functionality and data integrity, and
  2. Issues emanating from the end users, i.e., their unwillingness to use the new system. One reason may be because they find the interface and procedures too confusing. Another would be due to other inconveniences that come with adapting to a new set of procedures.

Despite all the meticulous scrutiny employed during Acceptance testing, there are just some problems that are made obvious only during Deployment. Issues belonging to the first set are dealt with easily because of the plans and procedures we put in place during the Preparation stage. As an added measure, our team will be on hand to make sure contingency plans are executed accordingly.

While the second set of issues is often neglected by many IT consultancy companies, we choose to meet it head on.

We fully understand that end users are most sensitive to the major changes that accompany a new system. It is precisely for this reason why our training activities during Deployment are designed not only to educate them but also to make them fully appreciate the necessity of both the new system and the familiarisation phase they will need to go through.

The faster we can bring your end users to accept the new system, the faster they can refocus on your company’s business objectives.

Here’s what we’ll do to guarantee the smoothest Deployment process you’ve ever experienced.

  • Employ the procedure and checklist formulated during the Preparation stage.
  • Ensure all end users are well acquainted with any additional tasks they would need to perform (e.g. filling up manual logs).
  • Assess which legacy systems can still be used alongside the new technology and which ones have to be retired.
  • Supervise the installation and optimal configuration of all supporting hardware and software to make sure the likelihood of errors originating from them are brought to near-zero levels.
  • Supervise the installation and optimal configuration of the products themselves.
  • Carry out data migration tasks if necessary.
  • Organise and oversee parallel runs to check for data and report inconsistencies.
  • Conduct training sessions in a professional and well-timed manner to eliminate end-users’ feelings of agitation and to take advantage of memory absorption and retention duration as with regards to their assigned duties and responsibilities.

Transition

Do you often feel uneasy whenever the reins to a newly purchased IT system are handed over to you? Perhaps there are some issues that you feel haven’t been fully settled but, at the same time, find it too late to back out, having already invested so much time and resources.

Alright, so maybe the thought of “backing up” never crossed your mind. However, the concern of being “not yet ready” is raised by many organisations towards the tail end of most Deployment stages. This usually drags the Deployment stage into a never-ending process.

Our team of highly experienced specialists will make sure you reach this point with utmost confidence to proceed on your own.

To wrap up our comprehensive IT Systems Implementation offering, we’ll take charge of the following:

  • Verify that all deliverables, including training materials and other technical documentation, are accomplished and expected outcomes are realised.
  • Make sure all technical documentation are placed in a secure and accessible location.
  • Institute best practices to ensure the IT system becomes fully utilised and to reduce its exposure to avoidable risks.
  • Establish open communication lines with the Technical Support team to enable quick resolution of issues.
  • Ensure complete knowledge transfer has been fully achieved so that your people will spend less time calling Technical Support and more on operations contributory to business growth.

Check our similar posts

Spend more to reduce costs?

It is becoming increasingly important to not to analyse energy consumption for all utility types, be it electricity, gas, water, heat, renewables, oil etc. The bottom line is both operational efficiency and utility costs monitoring. In the long run, these are management strategies designed to drive energy costs downwards as a continuous improvement cycle and as a measure of reducing carbon emissions.

It is also getting increasingly easier for organisations reduce energy use and achieve this goal using technology without having to “remember” to do it yourself. Organisations can never go wrong by investing in energy management software. There are varied software options to choose from depending on the organisational objective.
Some of the energy management objectives that organisations may need to meet are:

? Establishing baseline energy use

? Carrying out Energy audits

? Monitoring and measuring energy performance against the energy policies of an organisation and objectives

? Achieving energy certification
Energy management software?s come in handy when an organization wishes to achieve either of the above objectives.

Use of energy management software?s also assists organisations in measurement and verification of energy consumption as well as Monitoring and Targeting. Measurement and verification is where a company quantifies energy consumption beforehand (baseline energy use) and after energy consumption measurements are implemented in order to verify and report on the level of savings actually achieved.

Organisations that wish to verify the energy savings achieved by building retrofits can use energy management software?s. This is an important objective for companies that wish to either satisfy internal financial accounting and reporting requirements, or to meet the terms of third-party contracts for project implementation and management. Monitoring and targeting is also made easier by use of software. This is critical as a management technique, regardless of whether an organisation has specific facility retrofits in order to keep operations efficient and to monitor utility costs.
Overall, an investment in energy management software, is worthwhile in the achievement of management strategies designed to drive energy costs downwards as a continuous improvement cycle.

How Alcoa Canned the Cost of Recycling

Alcoa is one of the world?s largest aluminium smelting and casting multinationals, and involves itself in everything from tin cans, to jet engines to single-forged hulls for combat vehicles. Energy costs represent 26% of the company?s total refining costs, while electricity contributes 27% of primary production outlays. Its Barberton Ohio plant shaved 30% off both energy use and energy cost, after a capital outlay of just $21 million, which for it, is a drop in the bucket.

Aluminium smelting is so expensive that some critics describe the product as ?solid electricity?. In simple terms, the method used is electrolysis whereby current passes through the raw material in order to decompose it into its component chemicals. The cryolite electrolyte heats up to 1,000 degrees C (1,832 degrees F) and converts the aluminium ions into molten metal. This sinks to the bottom of the vat and is collected through a drain. Then they cast it into crude billets plugs, which when cooled can be re-smelted and turned into useful products.

The Alcoa Barberton factory manufactures cast aluminium wheels across approximately 50,000 square feet (4,645 square meters) of plant. It had been sending its scrap to a sister company 800 miles away; who processed it into aluminium billets – before sending them back for Barberton to turn into even more wheels. By building its own recycling plant 60 miles away that was 30% more efficient, the plant halved its energy costs: 50% of this was through process engineering, while the balance came from transportation.

The transport saving followed naturally. The recycling savings came from a state-of-the-art plant that slashed energy costs and reduced greenhouse gas emissions. Interestingly enough, processing recycled aluminium uses just 5% of energy needed to process virgin bauxite ore. Finally, aluminium wheels are 45% lighter than steel, resulting in an energy saving for Alcoa Barberton?s customers too.

The changes helped raise employee awareness of the need to innovate in smaller things too, like scheduling production to increase energy efficiency and making sure to gather every ounce of scrap. The strategic change created 30 new positions and helped secure 350 existing jobs.

The direction that Barberton took in terms of scrap metal recycling was as simple as it was effective. The decision process was equally straightforward. First, measure your energy consumption at each part of the process, then define the alternatives, forecast the benefits, confirm and implement. Of course, you also need to be able to visualise what becomes possible when you break with tradition.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
The Child at Work: Fun Team Builds with LEGO SERIOUS PLAY

There is a child just below the surface in all of us. When were kids, adults lopped off the sharp bits that intruded into their ?genteel? society. Schools, to their everlasting shame sanded away our unique free spirits, as they stuck us into uniforms and imposed a daily classroom discipline. We received badges and prizes if we obeyed, and strict sanctions when we did not. This produced a generation of middle-age managers who no longer know how to play.

Life can be so deadly serious ?

Things work pretty much the same in business. Life is deadly serious. If we want to keep our jobs, we must deliver on the bottom line in our departments. There is little time for fun outside the Christmas party, when we may, within the limits of decorum engage in activity for enjoyment and recreation, rather than a serious or practical purpose.

Team builds (and strategic planning sessions) can be deadly boring affairs that proceed down narrow funnels defined by human resource facilitators. No matter how hard HR they may try, the structural hierarchy will remain intact, unless they find a way to set it aside during the program. Injecting fun into the occasion liberates independent thought, and this is why.

? But not for a little child at play

Next time you dine out at a branded family restaurant, select a seat that allows you observe the kiddies? play zone. Notice how inventive children become, when the family hierarchy is not there to tell them what to do (although parents may try from the wrong side of the soundproof glass). The ?serious play? side of fun team-builds aims to liberate managers by releasing their child for the duration. Shall we dig a little deeper into this and discover the dynamics?

Many of us have less than perfect oral communication skills. This is one of the great impediments to modern business meetings. We may not have sufficient time to formulate our thoughts for them to remain relevant when we speak. When we express them, we sense the group?s impatience for us to hurry up, so other members can have their opportunity to contribute.

Sharing better thinking with LEGO? bricks

Most of us feel an urge to click the brightly coloured plastic bricks together that carpenter Ole Kirk Christiansen released into a war-weary world in 1949. The basic kit is a great leveller because the blocks are all the same, and the discriminators are the colours and the power of our imagination. Watching a free-form LEGO builder in action is equally fascinating, as we wonder ?what they will do next? and ?what is happening in their mind.?

Examples of LEGO Serious PLAY in action

Instead of asking team members to describe themselves in a minute, a LEGO? SERIOUS PLAY? facilitator may gather them around a table piled high with LEGO bricks instead, and ask them to each build a model of themselves. The atmosphere is informal with interaction and banter encouraged. It is still serious play though, as team members get to know each other, and their own personalities better

The system is equally effective in strategic sessions, where the facilitator provides specially selected building blocks for the team to experiment with as they learn to listen, and share. This enables them to deconstruct a problem into its component parts, and share solutions regardless of seniority, culture, and communication skills.

Creating problem- and solution-landscapes three dimensionally this way, enables open conversations that keep the focus on the problem. Participants at these team builds do not only reach effective consensus faster. They are also busy building better communication skills as they do.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Ready to work with Denizon?