How FieldElite helps Electricians

The need to hire an electrician arises more often than we expect. It’s quite common to come across problems with structure-wiring, whether at home or in your business premises. It’s, therefore, not surprising to come across a home or a business owner in search of electrical services.

Whether a startup or a fully-fledged business that offers electrical services, there are challenges that come with running the venture. Where you have field service electricians, the challenges are even compounded, more so on matters of assigning tasks, receiving complaints from customers, and receiving field service reports.

As we all know, an electrical business isn’t just limited to the management of field service electricians. You’ll have to manage all the processes, a responsibility that can be quite daunting.

It doesn’t have to be difficult, though. You can take advantage of a field service management software program to make the entire management process effortless.

FieldElite is one such software. With FieldElite, you can assign tasks, communicate, and receive reports from your electricians on the go. Incorporating field service management in your electrical business enables you to run your business operations smoothly. 

Below are some of the benefits of using FieldElite field service management software. 

Increased Efficiency

Improved efficiency is the number one benefit electricians can get from field service management software. With FieldElite, electricians can accept jobs while in the field and add attachments together with client signatures using their smartphones or tablets. From the field management software, they can get information on the optimal route to the site, the tools required for the job, the service history of the customer, and contractual commitments.

Managing and scheduling tasks on FieldElite are just a few clicks away for office-based operators. That means reduced travel times and delays that often cripple workforce management.

Improved Professionalism

FieldElite field management software gives you a professional edge over your competitors. With this field management software, you can store all your business-related information in a central place. Therefore, each of your electricians can access the data from anywhere using their smartphone or tablet installed with the FieldElite mobile application. As such, there?s no breach in communication, and that means the electricians will get the scheduled tasks on time. Building such relationships with your team in the field encourages teamwork and motivates each team member to play their part. Again, since you can monitor what’s going on in the field, you can address the issues raised by your electricians or customers as soon as possible. 

Effective Communication

Timely communication is very essential if you’re working with field technicians. Since you’ll not always be with them in the field, it’s always important to establish a proper communication channel to ensure information reaches them in time. With FieldElite field service management software, electricians receive notifications and details about tasks assigned to them via the FieldElite mobile app.

On the other hand, office-based staff can access the report with the details of the job once the electrician completes the given task. This implies that both the electricians and the office-based operators can get communication instantly, enabling them to see and manage their workloads. Individual electricians can close jobs on-site and proceed to the next task without having to do paperwork reporting. For this reason, electricians can complete multiple tasks within a short time, which improves their overall productivity.

High Accuracy

With FieldElite field service management software, missing data or incomplete information is a thing of the past. Electricians no longer have to deal with paperwork, which can be daunting and time-consuming, yet with a million and one errors. With FieldElite advanced mobile features, all field service processes and operations are automated. The electricians are left with quite little to do, and that minimises data entry errors.

Because the managers get real-time updates from the field techs, they can accurately maintain and track the field processes. With FieldElite mobile features, managers can get information regarding the job status, the actual time of arrival, and the time taken to complete the task. With such updates, the electricians are better placed to do the job well without wasting much time, thus improving their overall productivity. 

Improved Co-ordination With The Team 

Apart from improving the productivity of the electricians, FieldElite improves coordination with the entire management team. For instance, an electrician can be assigned new tasks within the same area where they’re currently assigned instead of sending another to complete a task in that same place. FieldElite makes this possible by always capturing the current location and job status.

Whenever a new request is made in an area, FieldElite first checks the database to confirm if there is an electrician already assigned in that area. If the status of the ongoing assignment is complete or almost complete and the new task request can wait for the remaining time, the electrician in the field would be assigned the new task. By doing so, the business saves on cost and time and minimises movements. 

Improved Customer Satisfaction

As an electrician, you’ll only be satisfied if the service you offer makes the customer happy. Apart from fixing their wiring problems, they?d be happy if you responded quickly to their request. This is only made possible with field service management software. With FieldElite, managers can notify the electricians on the service requests in their respective areas, allowing them to respond to the call within a very short time. Not only does this give you some level of satisfaction as the business owner but it’s also a win for the company. 

Make your field work-flow better with FieldElite, and improve the productivity of your electricians. With FieldElite releasing regular and timely updates, users aren’t left behind whenever there are changes in the field service industry. The updates introduce new features and capture new standards to ensure that you get the best experience with the software at all times.

Check our similar posts

What Energy Management Software did for CDC

Chrome Deposit Corporation ? that’s CDC for short ? reconditions giant rollers used to finish steel and aluminium sheets in Portage, Indiana by applying grinding, texturing and plating methods. While management was initially surprised when the University of Delaware singled their plant out for energy assessment, this took them on a journey to bring energy consumption down despite being in an expansion phase.

Metal finishing and refinishing is an energy-intensive business where machines mainly do the work while workforces as small as 50 individuals tend them. Environmental impacts also need countering within a challenging environment of burgeoning natural gas and electricity prices.

The Consultant’s Recommendations

The University of Delaware was fortunate that Chrome Deposit Corporation had consistently measured its energy consumption since inception in 1986. This enabled it to pinpoint six strategies as having potential for technological and process improvements.

  • Insulate condensate tanks and pipes
  • Analyse flue gas air-fuel ratios
  • Lower compressed air pressures
  • Install stack dampers on boilers
  • Replace belts with pulleys and cogs
  • Fit covers on plant exhaust fans

CDC implemented only four of the six recommendations. This was because the boiler manufacturer did not recommend stack dampers, and the company was unable to afford certain process automation and controls.

Natural Gas Savings

The project team began by analysing stack gases from boilers used to heat chrome tanks and evaporate wastewater. They found the boilers were burning rich and that several joints in gas lines were leaking. Correcting these issues achieved an instant gas saving of 12% despite increased production.

Reduced Water Consumption

The team established that city water was used to cool the rectifiers. It reduced this by an astonishing 85% by implementing a closed-loop system and adding two chillers. This also helped the water company spend less on chemicals, and energy to drive pumps, purifiers and fans.

Summary of Benefits

Electricity consumption reduced by 18% in real terms, and natural gas by 35%. When these two savings are merged they represent an overall 25% energy saving. These benefits were implemented across the company?s six other plants, resulting in benefits CDC management never dreamed of when the University of Delaware approached them.

ecoVaro offers a similar data analytics service that is available online worldwide. We have helped other companies slash their energy bills with similarly exciting results. We?ll be delighted to share ideas that only data analytics can reveal.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
The Connection between Big Data and MDM

Master Data is information that is critical to your business. This could include contracts, proprietary information, intellectual capital and a whole lot more besides. Because this often reposes in a variety of different places, you need a master data management / MDM policy to control it. That way, you can link it all together in a single, secure, backed up file.

This Sounds Like Big Data

Not necessarily: big data refers to extremely large data sets that are best stored and analysed on a cloud using big technology, in order to uncover trends, patterns and associations often relating to human behaviour. Of course, if you run a niche restaurant your critical master data might be limited to a few recipes and the books you do not care to show your accountant.

The distinction is largely a question of size: think of your master data as the subset of big data that you already have your mind around. According to John Case of IBM this is probably already in a structured format and available to share. He goes on to present a cogent case for using this as a peg point around which to systematise the rest. This is because the average organisation already has master data recording customers? and prospects? behaviour.

Do I Still Need My Master Data?

Yes you do, because real people created it with the benefit of human insight. Retain it as a separate set. Then compare it with the results of big data processing for even richer insights. Two heads are better that one and that goes for data processing too.

Trends in CRM Big Data

Adding data via location-aware devices like smartphones and tablets is adding a new dimension to customer information. We now know where they were when they made the enquiry or punched in the information. Use this geo-location data to hone the way you interact with customers and service their accounts. Do not phone a customer who makes decisions at work when they are at home.

Does My Master Data Belong on a Cloud?

There are a number of ?ifs? to consider. How comfortable are you with your service provider. What would happen if someone hacked their server? There are many advantages to cloud technology. Denizon knows of solutions you can rely on, and makes sure its clients have contingency plans to protect them at all times.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Total Quality Management

Total Quality Management (TQM) is another business management approach that focuses on the involvement of all members of the organisation to participate in improving processes, products, services, and the culture in which they work in. It is important that every team member realises how each individual and each activity affects, and in turn is affected by, others.

With the use of combined quality and management tools, TQM also aims to reduce losses brought about by wasteful practices, a common concern in most companies. Using the TQM strategy, business would also be able to identify the cause of a defect, thereby preventing it from entering the final product.

Deming’s 14 Points

At the core of the Total Quality Management concept and implementation is Deming’s 14 points, a set of guidelines on quality as conceptualised by W Edwards Deming, one of the pioneers of quality. Deming’s 14 points are as follows:

  1. Create constancy of purpose for improving products and services.
  2. Adopt the new philosophy.
  3. Cease dependence on inspection to achieve quality.
  4. End the practice of awarding business on price alone; instead, minimise total cost by working with a single supplier.
  5. Improve constantly and forever every process for planning, production and service.
  6. Institute training on the job.
  7. Adopt and institute leadership.
  8. Drive out fear.
  9. Break down barriers between staff areas.
  10. Eliminate slogans, exhortations and targets for the workforce.
  11. Eliminate numerical quotas for the workforce and numerical goals for management.
  12. Remove barriers that rob people of pride of workmanship, and eliminate the annual rating or merit system.
  13. Institute a vigorous program of education and self-improvement for everyone.
  14. Put everybody in the company to work accomplishing the transformation.

But if you were to reduce to bare bones the TQM philosophy from Deming’s 14 points, it would all come down to two simple goals:

  1. To make things right the first time; and
  2. To work for continuous improvement.

As with all other quality management process, the end goal is to be able to offer products and services that meet and even exceed customer’s expectations.

Find out more about our Quality Assurance services in the following pages:

Ready to work with Denizon?

Contact Us Today