The General Data Protection Regulation & The Duty to use Encryption

The General Data Protection Regulation, abbreviated to GDPR, raised a storm when it arrived. In reality, it merely tightened up on existing good practice according to digital security specialists Gemalto. The right to withhold consent and to be forgotten has always been there, for example. However, the GDPR brings a free enforcement service for consumers, thus avoiding the need for third party, paid assistance.

The GDPR Bottom Lines for Data Security
Moreover, the GDPR has penalties it can apply, of the order that might have a judge choking on his wig. Under it, data security measures such as pseudonymisation (substitution of identifying fields) and encryption (encoding including password protection) have become mandatory. Businesses must further respect their client data by:

a) Storing it in a secure environment supported by robust services and systems

b) Having proven measures to restore availability and access after a breach

c) Being able to prove frequent effectiveness testing of these measures.

The General Data Protection Regulation places an onus on businesses to report any data breaches. This places us in a difficult situation. We must either face at least a wrist slap upon reporting failures. Alternatively, pay a fine of up to ?10 million, or 2% of total worldwide annual turnover.

The Engineered Weak Link in the System
Our greatest threat of breach is probably when the data leaves our secure environment, and travels across cyberspace to an employee, stakeholder, collaborator, or the client themselves. Since email became open to attack, businesses and individuals have turned to sharing platforms like Dropbox, Google Drive, Skydrive, and so on. While these do allow an additional layer of password protection, none of these has proved foolproof. The GDPR may still fine us heavily, whether or not we are to blame for the actual breach.

How Hacking is Approaching Being a Science
We may make a mistake we may regret, if we do not take hacking seriously. The 10 worst data hacks Identity Force lists are proof positive that spending lots of money does not guarantee security (any more than having the biggest stock of nuclear weapons). We have to be smart, and start thinking the way that hackers do.

Hacker heaven is finding an Experian or a Dun & Bradstreet that may have shielded 143 million, and 33 million consumer records respectively, behind a single, flimsy cyber-security door. Ignorance is no excuse for them. They should simply have known better. They should have rendered consumer data unreadable at individual record level. The hackers could have found this too demanding to unpick, and have looked elsewhere.

How Data Encryption Can Help Prevent Hackers Succeeding
Encrypting data is dashboard driven, and businesses need not concern themselves about it works. There are, however, a few basic decisions they must take:

a) Purge the database of all information held without explicit permission

b) Challenge the need for the remaining data and purge the nice-to-haves

c) Adopt a policy of encrypting access at business and customer interfaces

d) Register with three freemium encryption services that seem acceptable

e) After experimenting, sign up for a premium service and be prepared to pay

Factors to Consider When Reaching a Decision
Life Hacker?suggests the following criteria although the list is a one-size-fits-all

a) Is the system fast, simple, and easy to operate

b) Can you encrypt hidden volumes within volumes

c) Can you mass-encrypt a batch of files easily

d) Do all other files remain encrypted when you open one

e) Do files automatically re-encrypt when you close them

f) How confident are you with the vendor, on a scale of 1 to 10

It may be wise to encrypt all the files on your system, and not just your customer data. We are always open to a hack by the competition after our strategic planning. If we leave the decision up to IT, then IT, being human may take the easy way out, and encrypt as little as possible.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Check our similar posts

What Kanban can do for Call Centre Response Times

When a Toyota industrial engineer named Taiichi Ohno was investigating ways to optimise production material stocks in 1953, it struck him that supermarkets already had the key. Their customers purchased food and groceries on a just-in-time basis, because they trusted continuity of supply. This enabled stores to predict demand, and ensure their suppliers kept the shelves full.

The Kanban system that Taiichi Ohno implemented included a labelling system. His Kanban tickets recorded details of the factory order, the delivery destination, and the process intended for the materials. Since then, Ohno?s system has helped in many other applications, especially where customer demand may be unpredictable.

Optimising Workflow in Call Centres
Optimising workflow in call centres involves aiming to have an agent pick up an incoming call within a few rings and deal with it effectively. Were this to be the case we would truly have a just-in-time business, in which operators arrived and left their stations according to customer demand. For this to be possible, we would need to standardise performance across the call centre team. Moving optimistically in that direction we would should do these three things:

  • Make our call centre operation nimble
  • Reduce the average time to handle calls
  • Decide an average time to answer callers

When we have done that, we are in a position to apply these norms to fluctuating call frequencies, and introduce ?kanbanned? call centre operators.

Making Call Centre Operations Nimble
The best place to start is to ask the operators and support staff what they think. Back in the 1960?s Robert Townsend of Avis Cars famously said, ?ask the people ? they know where the wheels are squeaking? and that is as true as ever.

  1. Begin by asking technical support about downtime frequencies, duration, and causes. Given the cost of labour and frustrated callers, we should have the fastest and most reliable telecoms and computer equipment we can find.
  1. Then invest in training and retraining operators, and making sure the pop-up screens are valuable, valid, and useful. They cannot do their job without this information, and it must be at least as tech-savvy as their average callers are.
  1. Finally, spruce up the call centre with more than a lick of paint to awaken a sense of enthusiasm and pride. Find time for occasional team builds and fun during breaks. Tele-operators have a difficult job. Make theirs fun!

Reducing Average Time to Handle Calls
Average length of contact is probably our most important metric. We should beware of shortening this at the cost of quality of interaction. To calculate it, use this formula:

Total Work Time + Total Hold Time + Total Post Call Time

Divided By

Total Calls Handled in that Period

Share recordings of great calls that highlight how your best operators work. Encourage role-play during training sessions so people learn by doing. Publish your average call-handling time statistics. Encourage individual operators to track how they are doing against these numbers. Make sure your customer information is up to date. While they must confirm core data, limit this so your operators can get down to their job sooner.

Decide a Target Time to Answer Calls
You should know what is possible in a matter of a few weeks. Do not attempt to go too tight on this one. It is better to build in say 10% slack that you can always trim in future. Once you have decided this, you can implement your Kanban system.

Introducing Kanban in Your Call Centre Operation
Monitor your rate of incoming calls through your contact centre, and adjust your operator-demand metric on an ongoing basis. Use this to calculate your over / under demand factor. Every operator should know the value on this Kanban ticket. It will tell them whether to speed up a little, or slow down a bit so they deliver the effort the call rate demands. It will also advise the supervisor when to call up reserves.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Disadvantages of Spreadsheets

Spreadsheets are flexible, inexpensive and easy to use. They are especially handy when it comes to beating report submission deadlines or making impromptu data computations. That’s why office workers, managers and even executives have made spreadsheets their go-to solution for such undertakings and more.

Spreadsheets have become so ubiquitous, that they’ve found their way into a wide range of applications including complex modelling, accounting reconciliations, market data analysis, work flow tracking and monitoring, analytical review and financial reporting.

Unfortunately, organisations heavy reliance on spreadsheets have made these User Developed Applications (UDA) into high-risk office tools. Simple spreadsheet errors like leaving out a negative sign or a cut-and-paste mistake have already caused million-dollar discrepancies. Also, when a fraudulent employee enters into the picture, the risks become unimaginable.

Think TransAlta?s spreadsheet cut-and-paste glitch (the company later called this a ?simple clerical error?) which caused the energy firm a whopping $24 million loss or Fidelity?s overstatement of its earnings owing to the omission of the minus sign on the spreadsheet of a $1.3 billion net capital loss.

In both cases and in many other similar spreadsheet fiasco, the errors played a major role in the organisation’s decision-making, leading to disastrous results including, but not limited to financial loss, shattered investor confidence and public embarrassment.

If these are scenarios your organisation can ill afford, then it’s time to ask yourself: Do the disadvantages of spreadsheets far outweigh their benefits to merit a call for total liberation from them?

More Spreadsheet Blogs


Spreadsheet Risks in Banks


Top 10 Disadvantages of Spreadsheets


Disadvantages of Spreadsheets – obstacles to compliance in the Healthcare Industry


How Internal Auditors can win the War against Spreadsheet Fraud


Spreadsheet Reporting – No Room in your company in an age of Business Intelligence


Still looking for a Way to Consolidate Excel Spreadsheets?


Disadvantages of Spreadsheets


Spreadsheet woes – ill equipped for an Agile Business Environment


Spreadsheet Fraud


Spreadsheet Woes – Limited features for easy adoption of a control framework


Spreadsheet woes – Burden in SOX Compliance and other Regulations


Spreadsheet Risk Issues


Server Application Solutions – Don’t let Spreadsheets hold your Business back


Why Spreadsheets can send the pillars of Solvency II crashing down

?

Advert-Book-UK

amazon.co.uk

?

Advert-Book-USA

amazon.com

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Quality Assurance

 

There is a truism that goes “The bitterness of poor quality is remembered long after the sweetness of low price has faded from memory”.

While every consumer can probably relate to this idea, business enterprises offering goods and services are the ones that should heed this the most.

Quality Management Systems

The concept of quality was first introduced in the 1800’s. Goods were then still mass-produced, created by the same set of people, with a few individuals assigned to do some “tweaking” on the product to bring it to acceptable levels. Their idea of quality at that time may not have been that well-defined, but it marked the beginnings of product quality and customer satisfaction as we know it now.

Since then, quality has developed into a very basic business principle that every organisation should strive to achieve. Yet while every business recognises the importance of offering product and service quality, it is not something that can be achieved overnight.

If you’ve been in any type of business long enough, you should know that there is no “quick-fix” to achieving quality. Instead, it is an evolving process that needs to be continually worked on. And this is where the importance of having a workable Quality Management System (QMS) in an organisation comes in.

Whatever Quality tools and processes you need to implement the change needed in your organisation, we can help you with it. We are ready to work in partnership with your team to develop strategic systems which will produce significant performance improvements geared towards the achievement of quality.

What is a Quality Management System?

A Quality Management System is defined as the set of inter-related objectives, processes, and operating procedures that organisations use as a guide to help them implement quality policies and attain quality objectives.

Needless to say, the ultimate goal of every quality management system is to establish quality as a core value of the company among all employees, and across all products and services. Why? Because quality services make for happy customers, and satisfied customers ensure continued business for the company.

A Quality Management System does not stop with simply having a set of guidelines that the leaders of a company can easily have their organisation members accept and adhere to. Rather, effective QMS can be implemented when management provides a culture of pride and patience, which will inspire acceptance of individual and group responsibility.

In this manner, not only the heads of the organisation but the employees as well, will develop the desire to achieve company goals that will benefit:

  • All contributing teams;
  • The customers; and
  • The company as a whole.

Find out more about our Quality Assurance services in the following pages:

Ready to work with Denizon?