The Future is Smarter with a Smart Meter

Traditionally, electricity and water meter consumption was measured via analogue meters. Utility billing was based on actual consumption units obtained from the meter by meter readers. This entailed physical visits to the metering point. Lots of challenges came with meter reading; talk of customers feeling their privacy is intruded, meter readers encountering hostile customers, dogs, closed gates. The result was estimated bills that were most often than not very high.

Smart meters can be dubbed as the ?next generation? type of meters. Smart meters send wireless electronic meter readings to one?s energy supplier automatically. There are both gas smart meters and electricity smart meters. Smart meters come with in-home displays, which give someone real-time feedback on their energy usage and the associated cost.

Smart meters communicate meter readings directly to utility companies therefore no one has to come to your home to read your meter; and neither are you required to submit meter readings yourself. This not only reduces costs, but leads to more accurate electricity bills practically eliminating estimated bills. Smart meters signal the end of estimated bills, and the end of overpaying or underpaying for energy.

Whereas a smart meter in itself does not save you money, the add-ons (in-home displays) that come with the smart meters and which give someone real-time feedback on their energy usage helps them to reduce the unnecessary energy use and this ultimately leads to better oversight into how to lower utility bills hence better management of one?s energy use.

In summary, a smart meter is a technology that enables energy consumers to see their energy as they use it, a technology where energy is displayed as it is being used and wireless ratings sent. Adoption of smart meters would mean the end of estimated energy bills.

Smart meters are also promising a smart future where all energy consuming devices can be connected to the internet and centrally controlled using computers or smartphones. This means one is able to switch off lights and other energy consuming devices from a central point, hence make savings and this will enable them to have greater control of their energy use, hence more comfort, convenience and life will be cheaper for all. This is the smarter future we are all looking forward to.

Check our similar posts

2015 ESOS Guidelines Chapter 3 ? The ESOS Assessment

ESOS operates in tandem with the ISO 50001 (Energy Management) system that encourages continual improvement in the efficient use of energy. Any UK enterprise qualifying for ESOS that has current ISO 50001 certification on the compliance date by an approved body (and that covers the entire UK corporate group) may present this as evidence of having completed its ESOS assessment. It does however still require board-level certification, following which it must notify the Environment Agency accordingly.

The Alternate ESOS Route

In the absence of an ISO 50001 energy management certificate addressing comprehensive energy use, a qualifying UK enterprise must:

  1. Measure Total Energy Consumption in either kWh or energy spend in pounds sterling, and across the entire operation including buildings, industrial processes and transport.
  2. Identify Areas of Significant Energy Consumption that account for at least 90% of the total. The balance falls into a de minimis group that is officially too trivial to merit consideration.
  3. Consider Available Routes to Compliance. These could include ISO 500001 part-certification, display energy certificates, green deal assessments, ESOS compliant energy audits, self-audits and independent assessments
  4. Do an Internal Review to make sure that you have covered every area of significant consumption. This is an important strategic step to avoid the possibility of failing to comply completely.
  5. Appoint an Approved Lead Assessor who may be internal or external to your enterprise, but must have ESOS approval. This person confirms you have met all ESOS requirements (unless you have no de minimis exceptions).
  6. Obtain Internal Certification by one of more board-level directors. They must certify they are satisfied with the veracity of the reports. They must also confirm that the enterprise is compliant with the scheme.
  7. Notify the Environment Agency of Compliance within the deadline using the online notification system at snapsurveys.com as soon as the enterprise believes is fully compliant.
  8. Assemble your ESOS Evidential Pack and back it up in a safe place. Remember, it is your responsibility to provide proof of the above. Unearthing evidence a year later it not something to look forward to.

The ESOS assessment process is largely self-regulatory, although there are checks and balances in place including lead assessor and board-level certifications. As you work through what may seem to be a nuisance remember the primary objectives. These are saving money and reducing carbon emissions. Contact Ecovaro if we can assist in any way.

8 Best Practices To Reduce Technical Debt

When past actions in software development return to haunt you…

Is your business being bogged down by technical debt? Let’s look at measures that you can take to reduce it and scale your operations without the weight pulling you back. 

 

Work with a flexible architecture.

Right from the word go, you want to use architecture whose design is malleable, especially with the rapid rate of software evolution witnessed today. Going with an architecture that keeps calling for too much refactoring, or whose design won’t accommodate future changes will leave you with costly technical debt. Use scalable architecture that allows you to modify or add new features in future releases. While on this, complex features required in the final product should be discussed at the planning stage, that way simplified solutions that will be easier to implement can be identified, as this will lead to less technical debt in the long run. 

 

The Deal with Refactoring 

This is basically cleaning up the code structure without changing its behaviour. With the updates, patches, and new functionalities that are added to the systems and applications, each change comes with the threat of more technical debt. Additionally, organisations are increasingly moving their IT infrastructure from on-premises facilities to colocation data centres and deploying them on the cloud. In such scenarios, some workarounds are often needed to enable the systems to function in the new environments, which they hadn’t been initially developed to accommodate. Here, you will need to take some time to refactor the existing system regularly, streamlining the code and optimizing its performance – and this will be key to pay down the tech debt. When working with a flexible architecture from the start, the amount of work that goes into this will be reduced, meaning there’ll be less tech debt involved. 

 

Run discovery tests

Discovery testing essentially takes place even before a line of code is written for the system or application. This takes place at the product definition stage, where human insight software is used to understand the needs of the customer and is particularly helpful in setting priorities for the development work that will be carried out. It gives your business the opportunity to minimize the technical debt by allowing customers to give you a roadmap of the most pertinent features desired from the product. 

 

Routine code review

Getting a fresh look at the product or application from different sets of eyes in the development team will improve the quality of the code, thus reducing technical debt. There’s a catch though – this should be planned in a convenient way that doesn’t end up becoming a burden for the developers. Here are suggestions:

● Break down pull requests

Instead of having complex pull requests where numerous changes in the code are introduced at a go, have this broken down into smaller manageable pull requests, each with a brief title and description about it. This will be easier for the code reviewer to analyse. 

● Define preferred coding practices

Documenting the preferred coding style will result in cleaner code, meaning the developers will focus their effort on reviewing the code itself, not losing time on code format debates.

 

Test automation

Relying only on scheduled manual testing opens you up to the risk of technical debt accruing rapidly, and not having sufficient resources to deal with the accumulated problems when they are identified. Automated testing on the other hand enables issues to be uncovered quicker, and with more precision. For instance, you can have automated unit tests that look at the functioning of the individual components of a system, or regression testing where the focus is on whether the code changes that have been implemented have affected related components of the system. However, establishing and maintaining automated testing will require quite some effort – making it more feasible for the long-term projects.

 

Keep a repository that tracks changes made

Do you have a record of changes made in the software? Keeping one in a repository that is accessible by the development team will make it easy to pin-point problems at their source. For instance, when software is being migrated to a new environment, or legacy software is in the process of being modernised, you will want to have an accurate record of changes that are being introduced, that way if there is an undesired impact on the system this it will be easier to zero-down on the cause.

 

Bring non-technical stakeholders on board

Does this conversation sound familiar?

Development Team: “We need to refactor the messy code quickly”

Product Team: “We have no idea what you are saying”

On one hand, you have the management or product team defining the product requirements, creating a project roadmap, and setting its milestones. On the other hand, there’s the software development/engineering that’s primarily focused on the product functionality, technical operations and clearing the backlog in code fixes. Poor communication between the two teams is actually a leading cause of technical debt.

For you to take concrete steps in managing your technical debt, the decision-makers in the organisation should understand its significance, and the necessity of reducing it. Explain to them how the debt occurred and why steps need to be taken to pay it down – but you can’t just bombard them with tech phrases and expect them to follow your thought process. 

So how do you go about it? Reframe the issues involved with the technical debt and explain the business value or impact of the code changes. Basically, the development team should approach it from a business point of view, and educate the management or production team about the cost of the technical debt. This can include aspects such as expenses in changing the code, salaries for the software engineers especially when the development team will need to be increased due to the workload piling up, as well as the revenue that is lost when the technical debt is allowed to spiral. 

The goal here is to show the management or production team how issues like failing to properly define the product requirements will slow down future software development, or how rushing the code will affect the next releases. That way, there will be better collaboration between the teams involved in the project. 

 

Allocate time and resources specifically for reducing technical debt

With management understanding that working with low-quality code is just like incurring financial debt and it will slow down product development, insist on setting time to deal with the debt. 

For instance, when it comes to the timing of application releases, meetings can be conducted to review short- and longer-term priorities. These meetings – where the development team and product team or management are brought together, the developers point out the software issues that should be resolved as a priority as they may create more technical debt. Management then ensures that budgets and plans are put in place to explicitly deal with those ongoing maintenance costs.

 

Retire old platforms

While most of the resources are going into developing new applications and improving the systems being used, the organisation should also focus on retiring the old applications, libraries, platforms, and the code modules. It’s recommended that you factor this into the application release plans, complete with the dates, processes and costs for the systems involved. 

 

Total overhaul

When the cost and effort of dealing with the technical debt far outweighs the benefits, then you may have to replace the entire system. At this tipping point, you’re not getting value from the technical debt, and it has become a painful issue that’s causing your organisation lots of difficulties. For instance, you may be dealing with legacy software where fixing it to support future developments has simply become too complicated. The patches available may only resolve specific issues with the system, and still leave you with lots of technical debt. Here, the best way out is to replace the system in its entirety. 

 

Final thoughts

Every software company has some level of tech debt. Just like financial debt, it is useful when properly managed, and a problem when ignored or allowed to spiral out of control. It’s a tradeoff between design/development actions and business goals. By taking measures to pay down your organization’s debt and address its interest as it accrues, you will avoid situations where short term solutions undermine your long-term goals. This is also key to enable your business to transition to using complex IT solutions easier, and even make the migration between data centres much smoother. These 8 measures will enable you to manage your technical debt better to prevent it from being the bottleneck that stifles your growth.

Using Pull Systems to Optimise Work Flows in Call Centres

When call centres emerged towards the end of the 20th century, they deserved their name ?the sweatshops of the nineties?. A new brand of low-paid workers crammed into tiny cubicles to interact with consumers who were still trying to understand the system. Supervisors followed ?scientific management? principles aimed at maximising call-agent activity. When there was sudden surge in incoming calls, systems and customer care fell over.

The flow is nowadays in the opposite direction. Systems borrowed from manufacturing like Kanban, Pull, and Levelling are in place enabling a more customer-oriented approach. In this short article, our focus is on Pull Systems. We discuss what are they, and how they can make modern call centres even better for both sets of stakeholders.

Pull Systems from a Manufacturing Perspective

Manufacturing has traditionally been push-based. Sums are done, demand predicted, raw materials ordered and the machines turned on. Manufacturers send out representatives to obtain orders and push out stock. If the sums turn out wrong inventories rise, and stock holding costs increase. The consumer is on the receiving end again and the accountant is irritable all day long.

Just-in-time thinking has evolved a pull-based approach to manufacturing. This limits inventories to anticipated demand in the time it takes to manufacture more, plus a cushion as a trigger. When the cushion is gone, demand-pull spurs the factory into action. This approach brings us closer to only making what we can sell. The consumer benefits from a lower price and the accountant smiles again.

Are Pull Systems Possible in Dual Call Centres

There are many comments in the public domain regarding the practicality of using lean pull systems to regulate call centre workflow. Critics point to the practical impossibility of limiting the number of incoming callers. They believe a call centre must answer all inbound calls within a target period, or lose its clients to the competition.

In this world-view customers are often the losers. At peak times, operators can seem keen to shrug them off with canned answers. When things are quiet, they languidly explain things to keep their occupancy levels high. But this is not the end of the discussion, because modern call centres do more than just take inbound calls.

Using the Pull System Approach in Dual Call Centres

Most call centre support-desks originally focused are handling technical queries on behalf of a number of clients. When these clients? customers called in, their staff used operator?s guides to help them answer specific queries. Financial models?determined staffing levels and the number of ?man-hours? available daily. Using a manufacturing analogy, they used a push-approach to decide the amount of effort they were going to put out, and that is where they planted their standard.

Since these early 1990 days, advanced telephony on the internet has empowered call centres to provide additional remote services in any country with these networks. They have added sales and marketing to their business models, and increased their revenue through commissions. They have control over activity levels in this part of their business. They have the power to decide how many calls they are going to make, and within reason when they are going to make them.

This dichotomy of being passive regarding incoming traffic on the one hand, and having active control over outgoing calls on the other, opens up the possibility of a partly pull-based lean approach to call centre operation. In this model, a switching mechanism moves dual trained operators between call centre duties and marketing activities, as required by the volume of call centre traffic, thus making a pull system viable in dual call centres.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Ready to work with Denizon?

Contact Us Today