How to be cleaner and greener indoors

The supply of water on planet earth is finite hence the need to conserve this precious resource. Water is a utility that is often used in and outdoors and for that reason, water conservation activities should be undertaken everywhere.

Get greener everywhere
Water saving can be achieved through various ways. Of utmost importance, fixing leaks should be undertaken in all areas. Small household leaks can add up to gallons of water lost every day. It is therefore important to check all water system fixtures and ensure that there are no leakages.

Greener bathroom habits
Turning off taps- this should be practised in the bathroom especially while shaving and brushing teeth. One could also consider using showers instead of baths since showers use less water and get into the habit of taking shorter showers.

Clean and green dishes
The kitchen is one of the areas where a lot of water is used. Some of the ways through which water can be conserved in the kitchen are:

  • Use of basins when washing dishes by hand
  • Using a dishwasher – when using the dish washer, it is important to make sure it’s fully loaded. Scraping plates instead of rinsing before loading it into the dishwasher will also go a long way in the conservation of the valuable commodity called water

Green your laundry and earn green bucks
The other area where water saving can be made is the laundry room. Washing only full loads of laundry will ensure that your washing machine is running at full efficiency hence you will be able to maximise your washer for energy efficiency. Always ensure you use the appropriate water level or load size selection on the washing machine. All these will not only save water but energy too and since savings are earnings you can smile all the way to the bank where some green bucks will be credited to your account.

Check our similar posts

8 Best Practices To Reduce Technical Debt

When past actions in software development return to haunt you…

Is your business being bogged down by technical debt? Let’s look at measures that you can take to reduce it and scale your operations without the weight pulling you back. 

 

Work with a flexible architecture.

Right from the word go, you want to use architecture whose design is malleable, especially with the rapid rate of software evolution witnessed today. Going with an architecture that keeps calling for too much refactoring, or whose design won’t accommodate future changes will leave you with costly technical debt. Use scalable architecture that allows you to modify or add new features in future releases. While on this, complex features required in the final product should be discussed at the planning stage, that way simplified solutions that will be easier to implement can be identified, as this will lead to less technical debt in the long run. 

 

The Deal with Refactoring 

This is basically cleaning up the code structure without changing its behaviour. With the updates, patches, and new functionalities that are added to the systems and applications, each change comes with the threat of more technical debt. Additionally, organisations are increasingly moving their IT infrastructure from on-premises facilities to colocation data centres and deploying them on the cloud. In such scenarios, some workarounds are often needed to enable the systems to function in the new environments, which they hadn’t been initially developed to accommodate. Here, you will need to take some time to refactor the existing system regularly, streamlining the code and optimizing its performance – and this will be key to pay down the tech debt. When working with a flexible architecture from the start, the amount of work that goes into this will be reduced, meaning there’ll be less tech debt involved. 

 

Run discovery tests

Discovery testing essentially takes place even before a line of code is written for the system or application. This takes place at the product definition stage, where human insight software is used to understand the needs of the customer and is particularly helpful in setting priorities for the development work that will be carried out. It gives your business the opportunity to minimize the technical debt by allowing customers to give you a roadmap of the most pertinent features desired from the product. 

 

Routine code review

Getting a fresh look at the product or application from different sets of eyes in the development team will improve the quality of the code, thus reducing technical debt. There’s a catch though – this should be planned in a convenient way that doesn’t end up becoming a burden for the developers. Here are suggestions:

● Break down pull requests

Instead of having complex pull requests where numerous changes in the code are introduced at a go, have this broken down into smaller manageable pull requests, each with a brief title and description about it. This will be easier for the code reviewer to analyse. 

● Define preferred coding practices

Documenting the preferred coding style will result in cleaner code, meaning the developers will focus their effort on reviewing the code itself, not losing time on code format debates.

 

Test automation

Relying only on scheduled manual testing opens you up to the risk of technical debt accruing rapidly, and not having sufficient resources to deal with the accumulated problems when they are identified. Automated testing on the other hand enables issues to be uncovered quicker, and with more precision. For instance, you can have automated unit tests that look at the functioning of the individual components of a system, or regression testing where the focus is on whether the code changes that have been implemented have affected related components of the system. However, establishing and maintaining automated testing will require quite some effort – making it more feasible for the long-term projects.

 

Keep a repository that tracks changes made

Do you have a record of changes made in the software? Keeping one in a repository that is accessible by the development team will make it easy to pin-point problems at their source. For instance, when software is being migrated to a new environment, or legacy software is in the process of being modernised, you will want to have an accurate record of changes that are being introduced, that way if there is an undesired impact on the system this it will be easier to zero-down on the cause.

 

Bring non-technical stakeholders on board

Does this conversation sound familiar?

Development Team: “We need to refactor the messy code quickly”

Product Team: “We have no idea what you are saying”

On one hand, you have the management or product team defining the product requirements, creating a project roadmap, and setting its milestones. On the other hand, there’s the software development/engineering that’s primarily focused on the product functionality, technical operations and clearing the backlog in code fixes. Poor communication between the two teams is actually a leading cause of technical debt.

For you to take concrete steps in managing your technical debt, the decision-makers in the organisation should understand its significance, and the necessity of reducing it. Explain to them how the debt occurred and why steps need to be taken to pay it down – but you can’t just bombard them with tech phrases and expect them to follow your thought process. 

So how do you go about it? Reframe the issues involved with the technical debt and explain the business value or impact of the code changes. Basically, the development team should approach it from a business point of view, and educate the management or production team about the cost of the technical debt. This can include aspects such as expenses in changing the code, salaries for the software engineers especially when the development team will need to be increased due to the workload piling up, as well as the revenue that is lost when the technical debt is allowed to spiral. 

The goal here is to show the management or production team how issues like failing to properly define the product requirements will slow down future software development, or how rushing the code will affect the next releases. That way, there will be better collaboration between the teams involved in the project. 

 

Allocate time and resources specifically for reducing technical debt

With management understanding that working with low-quality code is just like incurring financial debt and it will slow down product development, insist on setting time to deal with the debt. 

For instance, when it comes to the timing of application releases, meetings can be conducted to review short- and longer-term priorities. These meetings – where the development team and product team or management are brought together, the developers point out the software issues that should be resolved as a priority as they may create more technical debt. Management then ensures that budgets and plans are put in place to explicitly deal with those ongoing maintenance costs.

 

Retire old platforms

While most of the resources are going into developing new applications and improving the systems being used, the organisation should also focus on retiring the old applications, libraries, platforms, and the code modules. It’s recommended that you factor this into the application release plans, complete with the dates, processes and costs for the systems involved. 

 

Total overhaul

When the cost and effort of dealing with the technical debt far outweighs the benefits, then you may have to replace the entire system. At this tipping point, you’re not getting value from the technical debt, and it has become a painful issue that’s causing your organisation lots of difficulties. For instance, you may be dealing with legacy software where fixing it to support future developments has simply become too complicated. The patches available may only resolve specific issues with the system, and still leave you with lots of technical debt. Here, the best way out is to replace the system in its entirety. 

 

Final thoughts

Every software company has some level of tech debt. Just like financial debt, it is useful when properly managed, and a problem when ignored or allowed to spiral out of control. It’s a tradeoff between design/development actions and business goals. By taking measures to pay down your organization’s debt and address its interest as it accrues, you will avoid situations where short term solutions undermine your long-term goals. This is also key to enable your business to transition to using complex IT solutions easier, and even make the migration between data centres much smoother. These 8 measures will enable you to manage your technical debt better to prevent it from being the bottleneck that stifles your growth.

How Alcoa Canned the Cost of Recycling

Alcoa is one of the world?s largest aluminium smelting and casting multinationals, and involves itself in everything from tin cans, to jet engines to single-forged hulls for combat vehicles. Energy costs represent 26% of the company?s total refining costs, while electricity contributes 27% of primary production outlays. Its Barberton Ohio plant shaved 30% off both energy use and energy cost, after a capital outlay of just $21 million, which for it, is a drop in the bucket.

Aluminium smelting is so expensive that some critics describe the product as ?solid electricity?. In simple terms, the method used is electrolysis whereby current passes through the raw material in order to decompose it into its component chemicals. The cryolite electrolyte heats up to 1,000 degrees C (1,832 degrees F) and converts the aluminium ions into molten metal. This sinks to the bottom of the vat and is collected through a drain. Then they cast it into crude billets plugs, which when cooled can be re-smelted and turned into useful products.

The Alcoa Barberton factory manufactures cast aluminium wheels across approximately 50,000 square feet (4,645 square meters) of plant. It had been sending its scrap to a sister company 800 miles away; who processed it into aluminium billets – before sending them back for Barberton to turn into even more wheels. By building its own recycling plant 60 miles away that was 30% more efficient, the plant halved its energy costs: 50% of this was through process engineering, while the balance came from transportation.

The transport saving followed naturally. The recycling savings came from a state-of-the-art plant that slashed energy costs and reduced greenhouse gas emissions. Interestingly enough, processing recycled aluminium uses just 5% of energy needed to process virgin bauxite ore. Finally, aluminium wheels are 45% lighter than steel, resulting in an energy saving for Alcoa Barberton?s customers too.

The changes helped raise employee awareness of the need to innovate in smaller things too, like scheduling production to increase energy efficiency and making sure to gather every ounce of scrap. The strategic change created 30 new positions and helped secure 350 existing jobs.

The direction that Barberton took in terms of scrap metal recycling was as simple as it was effective. The decision process was equally straightforward. First, measure your energy consumption at each part of the process, then define the alternatives, forecast the benefits, confirm and implement. Of course, you also need to be able to visualise what becomes possible when you break with tradition.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Eliminate The Complexities Of Your IT System

There may have been times when you actually spent on the right IT system but didn’t have adequate expertise to instil the appropriate learning curve for your end users. Oftentimes, users find a new system too complicated and end up spending more hours familiarising with intricate processes than is economically acceptable.

There are also applications that are just too inherently sophisticated that, even after the period of familiarisation, a lot of time is still spent managing or even just using them. Therefore, at the end of each day, your administrators and users aren’t able to complete much business-related tasks.

The first scenario can be solved by providing adequate training and tech support. The second might require enhancements or, in extreme cases, an overhaul of the technology itself.

For instance, consider what happens right after the conclusion of a merger and acquisition (M&A). CIOs from both sides and their teams will have to work hard to bring disparate technologies together. The objective is to hide these complexities and allow customers, managers, suppliers and other stakeholders to get hold of relevant information with as little disruption as possible.

One solution would be to implement Data Warehousing, OLAP, and Business Intelligence (BI) technologies to handle extremely massive data and present them into usable information.

These are just some of the many scenarios where you’ll need our expertise to eliminate the complexities that can slow your operations down.

Here are some of the solutions and benefits we can offer when we start working with you:

  • Consolidated hardware, storage, applications, databases, and processes for easier and more efficient management at a fraction of the usual cost.
  • BI (Business Intelligence) technologies for improved quality of service and for your people, particularly your managers, to focus on making decisions and not just filtering out data.
  • Training, workshops, and discussions that provide a clear presentation of the inter-dependencies among applications, infrastructure, and the business processes they support.
  • Increased automation of various processes resulting in shorter administration time. This will free your administrators and allow them to shift their attention to innovative endeavours.

Find out how we can increase your efficiency even more:

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Ready to work with Denizon?

Contact Us Today