How Small Irish Businesses Avoid the GDPR Sting

Accountants providing chartered accounting services and tax advice are alerting smaller Irish companies to the consequences of the pending General Data Protection Regulation (GDPR). They believe these are going to feel the most pain come 25 May 2018, if they do not implement GDPR by then. We are trying our best to help avoid this situation by providing advice.

How to Kick the GDPR Ball into Play

The Irish Information Commissioner?s Office has produced a toolkit regarding where?s best to start. They suggest beginning with an information security assessment to determine the gaps companies need to close. Once quantified, this leads naturally to a plan of action, and resources needed to fulfil it. Here?s how to go about it:

1. Start by assessing your current ability to identify, assess, and manage threats to customer data security. Have you done anything at all to date? You must be holding some customer information surely, and it is highly likely the GDPR applies to you.

2. Next, review your company?s current customer data security policies. Are they documented and approved, or do new employees discover them sitting next to Nellie? Rate yourself on a scale where ten is successful implementation.

3. Now consider how well you have pinned responsibilities on individuals to implement policies and take the lead on GDPR. The latter should be the business owner, or a board member with clout to make things happen.

4. By now, you should have a grasp of the scale of work ahead of you, remembering the EU deadline is 25 May 2018. If this sounds overwhelming, consider outsourcing to your accountant or a specialist provider.

5. Under the General Data Protection Regulation you have only 72 hours to report a breach of customer data security to the Information Commissioner?s Office. Do you have a quality assurance mechanism to oversee this?

Tangible Things to Bring Your Own People on Board

With all the changes going on, there is a risk of your employees regarding GDPR as ?another management idea going nowhere.? Thus, it is important to incorporate the new EU regulations in staff training, particularly with regard to data security generally. They may fully come on board only once they see tangible signs of progress. You should in any case put the following measures in place unless you already have them:

1. A secure area for your servers and for any paperwork your customers provided. This implies access control on a need-to-know basis to protect the information against loss, damage, and theft.

2. A protocol for storage media and record disposal when you no longer require them or something supersedes them. You are the custodian of other people?s information and they deserve nothing less.

3. Procedures to secure customer data on employee mobile devices and computers: This must extend to work done at home, at consultant sites, and by remote workers.

4. Secure configuration of all existing and new hardware to minimise vulnerability and storage media crashes. These quality assurance measures should extend to removable media and remote backups.

So Is This the Worst of the Pain?

We are at the heart of the matter, although there is more to tell in future articles. You may be almost there, if you already protect your proprietary information. If not, you may have key company information already open to malware.We should welcome the EU General Data Protection Regulation as a notice that it is time to face up to the challenges of data protection and security generally. The age of hacking and malware is upon us. The offender could be a disgruntled employee, or your competition just down the street. It is time to take precautions.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Check our similar posts

Green Business!

Carbon emissions reduction has evolved beyond simply good citizenship to being a business tool. Implementing ?green? initiatives is now a competitive weapon which defines real business opportunities and bottom line savings that can contribute significant financial value to the organisation while meeting demanding customer requirements for sustainable and low-carbon products.

Energy efficiency is a low cost resource for achieving carbon emissions reduction. Better energy efficiency simply translates to lesser carbon emissions and less energy usage which translates into saved costs.

Reduction of an organisations carbon footprint is each and everyone?s responsibility. Human activities are the key responsibility for the release of greenhouse gas emissions into the atmosphere. These include usage of electricity generated from fossil fuel, heating or driving.

At the corporate level, various measures can be instigated to increase energy efficiency. Some of these can be, having zone lighting with sensors to minimise unnecessary office lighting, timers on large IT equipment, promoting energy efficient behaviour in the office, asking staff to switch off and unplug appliances when not in use and minimising staff travel.
At the individual level; it is the small habits that count; cultivating the habit of switching off unnecessary lights, plugging out appliances that are not in use, using video conferencing or online chatting instead of having to travel to meetings, using public transport instead of taking a taxi/ personal car and using energy efficient cars.

All these initiatives assist organisations in their corporate social responsibility reports and play a role in sustainability rankings which is instrumental to customers who are increasingly considering sustainability rankings in investment decisions, while achieving the goal of cost reduction internally.

A Definitive List of the Business Benefits of Cloud Computing ? Part 3

Strengthens business continuity/disaster recovery capabilities

Today’s business landscape calls for companies to have reliable business continuity and disaster recovery capabilities. After all, when the system goes down, customers and even employees would rarely ask ‘why‘ or ‘what happened‘ but instead go directly to the ‘how soon can we get back up‘ part.

So unless they’ve been struck by the same unforeseen disaster your business is also experiencing, a couple of hours downtime is plenty enough for most of these people. What’s worse is when they simply don’t wait until they get access again and just go to other providers that can offer the same services. In short, your inability to provide continuous IT and business services could translate to lost opportunities which your competition would only be too willing to gain. And that’s not even counting the possibility of losing essential data and other potential negative impact that critical IT failure can bring about.

The answer to avoiding such a scenario is of course, having a sound business continuity and disaster recovery plan in place. But this is actually easier said than done.

Traditionally, setting up a business continuity plan entailed some tedious procedures in addition to very costly infrastructure. We’re talking here about acquiring and maintaining practically a replication of the hardware infrastructure and environments currently existing for business-critical systems and data. Note that these mirror systems should be set-up, housed, and maintained in a remote facility or location.

Making the deployment even more complex is the constant need to update the data in storage as well as keep software applications in sync between the system in use and the one on standby mode. This process would involve the physical transfer of data and syncing of applications, which is cumbersome and again, expensive.

While large enterprises would not even think twice about having to spend so much to ensure that operations would never come to a grinding halt, most small and mid-sized organisations would not have the required financial means for them to even start considering this option. Often, the bulk of their disaster recovery plan would simply consist of some tape backups, and a lot of hoping that they would never have to suffer from any outage or IT failure.

But all that can be changed with the arrival of cloud computing.

A cloud strategy offers an affordable solution for business continuity and disaster recovery for SMBs with limited resources and even big companies trying to minimise expenses by looking for alternative options.

A reliable service provider would already have the required infrastructure and software vital to a viable BC/DR plan and complete with the appropriate security measures. Organisations need not spend upfront for these facilities, but get to benefit from having updated data backup and a virtualised mirror system that would allow them to quickly get back up in the event of an outage or catastrophic disaster.

When looking to the cloud for a cost-effective BC/DR plan however, it’s worth keeping in mind that not all cloud providers are created equal. That’s why businesses also have many important factors to take into account before signing cloud contracts.

Yes, provision for continuity and and taking necessary precautions against outages are inherent in the cloud service itself, but you’d be surprised how many of these providers don’t actually take responsibility for service interruption. To give organisations some assurance of the cloud company’s capacity for continued service, contracts should stipulate availability guarantees and liability for downtime that the provider is willing to answer for.

Once these relevant issues are ironed out however, it’s easy for business to see how cloud-based data storage and computing can significantly lower the costs involved for SMB BC/DR while greatly improving efficiency, mobility, and collaboration capabilities.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Failure Mode and Effects Analysis

 

Any business in the manufacturing industry would know that anything can happen in the development stages of the product. And while you can certainly learn from each of these failures and improve the process the next time around, doing so would entail a lot of time and money.
A widely-used procedure in operations management utilised to identify and analyse potential reliability problems while still in the early stages of production is the Failure Mode and Effects Analysis (FMEA).

FMEAs help us focus on and understand the impact of possible process or product risks.

The FMEA method for quality is based largely on the traditional practice of achieving product reliability through comprehensive testing and using techniques such as probabilistic reliability modelling. To give us a better understanding of the process, let’s break it down to its two basic components ? the failure mode and the effects analysis.

Failure mode is defined as the means by which something may fail. It essentially answers the question “What could go wrong?” Failure modes are the potential flaws in a process or product that could have an impact on the end user – the customer.

Effects analysis, on the other hand, is the process by which the consequences of these failures are studied.

With the two aspects taken together, the FMEA can help:

  • Discover the possible risks that can come with a product or process;
  • Plan out courses of action to counter these risks, particularly, those with the highest potential impact; and
  • Monitor the action plan results, with emphasis on how risk was reduced.

Find out more about our Quality Assurance services in the following pages:

Ready to work with Denizon?

Contact Us Today