What Sub-Metering did for Nissan in Tennessee

When Nissan built its motor manufacturing plant in Smyrna 30 years ago, the 5.9 million square-foot factory employing over 8,000 people was state of art. After the 2005 hurricane season sky-rocketed energy prices, the energy team looked beyond efficient lighting at the more important aspect of utility usage in the plant itself. Let’s examine how they went about sub-metering and what it gained for them.

The Nissan energy team faced three challenges as they began their study. They had a rudimentary high-level data collection system (NEMAC) that was so primitive they had to transfer the data to spread-sheets to analyse it. To compound this, the engineering staff were focused on the priority of getting cars faster through the line. Finally, they faced the daunting task of making modifications to reticulation systems without affecting manufacturing throughput. But where to start?

The energy team chose the route of collaboration with assembly and maintenance people as they began the initial phase of tracking down existing meters and detecting gaps. They installed most additional equipment during normal service outages. Exceptions were treated as minor jobs to be done when convenient. Their next step was to connect the additional meters to their ageing NEMAC, and learn how to use it properly for the first time.

Although this was a cranky solution, it had the advantage of not calling for additional funding which would have caused delays. However operations personnel were concerned that energy-saving shutdowns between shifts and over weekends could cause false starts. ?We’ve already squeezed the lemon dry,? they seemed to say. ?What makes you think there?s more to come??

The energy team had a lucky break when they stumbled into an opportunity to prove their point early into implementation. They spotted a four-hourly power consumption spike they knew was worth examining. They traced this to an air dryer that was set to cyclical operation because it lacked a dew-point sensor. The company recovered the $1,500 this cost to fix, in an amazing 6 weeks.

Suitably encouraged and now supported by the operating and maintenance departments, the Smyrna energy team expanded their project to empower operating staff to adjust production schedules to optimise energy use, and maintenance staff to detect machines that were running without output value. The ongoing savings are significant and levels of shop floor staff motivation are higher.

Let’s leave the final word to the energy team facilitator who says, ?The only disadvantage of sub-metering is that now we can’t imagine doing without it.?

Contact Us

(+353)(0)1-443-3807 – IRL
(+44)(0)20-7193-9751 – UK

Check our similar posts

Uncover hidden opportunities with energy data analytics

What springs to mind when you hear the words energy data analytics? To me, I feel like energy data analytics is not my thing. Energy data analytics, however, is of great importance to any organisation or business that wants to run more efficiently, reduce costs, and increase productivity. Energy efficiency is one of the best ways to accomplish these goals.

Energy efficiency is not about investment in expensive equipment and internal reorganization. Enormous energy saving opportunities is hidden in already existing energy data. Given that nowadays, energy data can be recorded from almost any device, a lot of data is captured regularly and therefore a lot of data is readily available.

Organisations can use this data to convert their buildings’ operations from being a cost centre to a revenue centre through reduction of energy-related spending which has a significant impact on the profitability of many businesses. All this is possible through analysis and interpretation of data to predict future events with greater accuracy. Energy data analytics therefore is about using very detailed data for further analysis, and is as a consequence, a crucial aspect of any data-driven energy management plan.

The application of Data and IT could drive significant cost savings in company-owned buildings and vehicle fleets. Virtual energy audits can be performed by combining energy meter data with other basic data about a building e.g. location, to analyse and identify potential energy savings opportunities. Investment in energy dashboards can further enable companies to have an ongoing look at where energy is being consumed in their buildings, and thus predict ways to reduce usage, not to mention that energy data analytics unlock savings opportunities and help companies to understand their everyday practices and operating requirements in a much more comprehensive manner.

Using energy data analytics can enable an organisation to: determine discrepancies between baseline and actual energy data; benchmark and compare previous performance with actual energy usage. Energy data analytics also help businesses and organisations determine whether or not their Building Management System (BMS) is operating efficiently and hitting the targeted energy usage goals. They can then use this data to investigate areas for improvement or energy efficient upgrades. When energy data analytics are closely monitored, companies tend to operate more efficiently and with better control over relevant BMS data.

Failure Mode and Effects Analysis

Any business in the manufacturing industry would know that anything can happen in the development stages of the product. And while you can certainly learn from each of these failures and improve the process the next time around, doing so would entail a lot of time and money.
A widely-used procedure in operations management utilised to identify and analyse potential reliability problems while still in the early stages of production is the Failure Mode and Effects Analysis (FMEA).

FMEAs help us focus on and understand the impact of possible process or product risks.

The FMEA method for quality is based largely on the traditional practice of achieving product reliability through comprehensive testing and using techniques such as probabilistic reliability modelling. To give us a better understanding of the process, let’s break it down to its two basic components ? the failure mode and the effects analysis.

Failure mode is defined as the means by which something may fail. It essentially answers the question “What could go wrong?” Failure modes are the potential flaws in a process or product that could have an impact on the end user – the customer.

Effects analysis, on the other hand, is the process by which the consequences of these failures are studied.

With the two aspects taken together, the FMEA can help:

Discover the possible risks that can come with a product or process;
Plan out courses of action to counter these risks, particularly, those with the highest potential impact; and
Monitor the action plan results, with emphasis on how risk was reduced.

Find out more about our Quality Assurance services in the following pages:

Quality Assurance

There is a truism that goes “The bitterness of poor quality is remembered long after the sweetness of low price has faded from memory”.

While every consumer can probably relate to this idea, business enterprises offering goods and services are the ones that should heed this the most.

Quality Management Systems

The concept of quality was first introduced in the 1800’s. Goods were then still mass-produced, created by the same set of people, with a few individuals assigned to do some “tweaking” on the product to bring it to acceptable levels. Their idea of quality at that time may not have been that well-defined, but it marked the beginnings of product quality and customer satisfaction as we know it now.

Since then, quality has developed into a very basic business principle that every organisation should strive to achieve. Yet while every business recognises the importance of offering product and service quality, it is not something that can be achieved overnight.

If you’ve been in any type of business long enough, you should know that there is no “quick-fix” to achieving quality. Instead, it is an evolving process that needs to be continually worked on. And this is where the importance of having a workable Quality Management System (QMS) in an organisation comes in.

Whatever Quality tools and processes you need to implement the change needed in your organisation, we can help you with it. We are ready to work in partnership with your team to develop strategic systems which will produce significant performance improvements geared towards the achievement of quality.

What is a Quality Management System?

A Quality Management System is defined as the set of inter-related objectives, processes, and operating procedures that organisations use as a guide to help them implement quality policies and attain quality objectives.

Needless to say, the ultimate goal of every quality management system is to establish quality as a core value of the company among all employees, and across all products and services. Why? Because quality services make for happy customers, and satisfied customers ensure continued business for the company.

A Quality Management System does not stop with simply having a set of guidelines that the leaders of a company can easily have their organisation members accept and adhere to. Rather, effective QMS can be implemented when management provides a culture of pride and patience, which will inspire acceptance of individual and group responsibility.

In this manner, not only the heads of the organisation but the employees as well, will develop the desire to achieve company goals that will benefit:

All contributing teams;
The customers; and
The company as a whole.