How Energy Conservation saved Fambeau River Paper

Rising energy costs caught this Wisconsin paper mill napping, and it soon shut down because it was unable to innovate. Someone else bought it and turned it around by measuring, modifying, monitoring and listening to people.

The Fambeau River Paper Mill in Prince County, Wisconsin USA employed 13% of the city?s residents until rising energy costs shut it down in 2006. Critics wrote it off as an energy dinosaur unable to adapt. But that was before another company bought it out and resuscitated it as a fleet-footed winner.

Its collapse was a long time coming and almost inevitable. Wisconsin electricity prices had grown a third since 1997, the machinery was antiquated and the dependence on fossil power absolute. So what did the new owners change, and is there anything we can learn from this?

The key to understanding what suddenly went right was the new owners? ability to listen. They requested a government Energy Assessment that suggested a number of small step changes that took them where they needed to go in terms of energy saving. These included enhancements in steam systems and fuel switch modifications. However they needed more than that.

The second game changer was tracking down key members of the old workforce and listening to them too. This combination enabled them to finally hire back 92% of the original labour force under the same terms and conditions – and still make a profit (the other 8% had moved on elsewhere or retired). The combined energy savings produced a payback plan of 5.25 years. Three years into the project their capital investment of $15 million had already clawed back the following electricity savings.

  • Evaporator Temperature Control $2,245,000
  • Hot Water Heat Recovery $2,105,000
  • Paper Machine Devronisers $1,400,000
  • Increased Boiler Output $1,134,000
  • Paper Machine Modifications; $761,000
  • Motive Air Dryer $610,000
  • Accumulator Savings $448,000
  • Densified Fuels Plant $356,000

In terms of carbon dioxide produced, the Fambeau River Paper Mill?s contribution dropped from 1 ton to 600 pounds.

How well do you know where your company?s energy spend is concentrated, and how this compares with your industry average; could you be doing better if you innovated, and by how much? Get these questions answered by asking ecoVaro how easy it could be to get on top of your carbon metrics. This could cost you a phone call and a payback on it so rapid it’s not worth stopping to calculate.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Check our similar posts

Integrated eCommerce – The right way to do extend your business online

With more people spending more time on the Web, now is the perfect time to start selling your products and services online. And if you think those people are only busy posting status updates on Facebook and Twitter but avoid all other websites, think again. Many are actually buying stuff online. E-commerce has never been bigger. In the UK, it was already worth 100 Billion two years ago.

Buyers are finding it more convenient to buy products and services online because they can do so from practically anywhere; even in the comfort of their homes. What’s more, they could browse through more choices at a fraction of the time they?d have spent doing the same thing in brick and mortar establishments.

So if your potential buyers are already out there, what’s stopping you from opening your virtual doors to greet them?

Antiquated e-Commerce

Now, before you start getting excited in setting up your own idea of an eCommerce-ready website, you might want to be aware of what a sound e-commerce investment entails these days. If all you’re thinking is a site that accepts orders and have someone enter those orders in your accounting system, then you’ve got it all wrong.

You’re never going to get good returns on your investment that way. While you’re opening doors for new income streams, you’re also introducing additional costs and sophistication for processes that are highly susceptible to errors, inconsistencies, delays, and, eventually, client dissatisfaction.

Doing it right with integrated e-Commerce

To compete with others who are also offering the same products and services as yours, you need to ensure complete customer satisfaction. The best way to achieve this is to employ integrated e-commerce. This is an e-commerce system that combines your payment system, accounting, ERP, CRM, inventory management, analytics, and others into a cohesive, synchronised environment.

The idea is to do away with majority of your manual tasks in order to achieve fast, efficient, accurate, and secure transactions and other related processes.

eCommerce integration will allow you to do business 24/7 without requiring any of your staff to render the same number of hours. That means, your company continues to operate and earn even while all of you are fast sleep.

Then when you’re up, you can view reports telling you what transpired overnight, over the weekend or over any specified period of time. The information you obtain can help you make well-informed decisions and act on issues much quicker.

And because your business is on the Web, you can serve customers and obtain new ones from geographical locations far from where your office or store is actually located. If you want, you can even gain customers from halfway around the world.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
2015 ESOS Guidelines Chapter 3 ? The ESOS Assessment

ESOS operates in tandem with the ISO 50001 (Energy Management) system that encourages continual improvement in the efficient use of energy. Any UK enterprise qualifying for ESOS that has current ISO 50001 certification on the compliance date by an approved body (and that covers the entire UK corporate group) may present this as evidence of having completed its ESOS assessment. It does however still require board-level certification, following which it must notify the Environment Agency accordingly.

The Alternate ESOS Route

In the absence of an ISO 50001 energy management certificate addressing comprehensive energy use, a qualifying UK enterprise must:

  1. Measure Total Energy Consumption in either kWh or energy spend in pounds sterling, and across the entire operation including buildings, industrial processes and transport.
  2. Identify Areas of Significant Energy Consumption that account for at least 90% of the total. The balance falls into a de minimis group that is officially too trivial to merit consideration.
  3. Consider Available Routes to Compliance. These could include ISO 500001 part-certification, display energy certificates, green deal assessments, ESOS compliant energy audits, self-audits and independent assessments
  4. Do an Internal Review to make sure that you have covered every area of significant consumption. This is an important strategic step to avoid the possibility of failing to comply completely.
  5. Appoint an Approved Lead Assessor who may be internal or external to your enterprise, but must have ESOS approval. This person confirms you have met all ESOS requirements (unless you have no de minimis exceptions).
  6. Obtain Internal Certification by one of more board-level directors. They must certify they are satisfied with the veracity of the reports. They must also confirm that the enterprise is compliant with the scheme.
  7. Notify the Environment Agency of Compliance within the deadline using the online notification system at snapsurveys.com as soon as the enterprise believes is fully compliant.
  8. Assemble your ESOS Evidential Pack and back it up in a safe place. Remember, it is your responsibility to provide proof of the above. Unearthing evidence a year later it not something to look forward to.

The ESOS assessment process is largely self-regulatory, although there are checks and balances in place including lead assessor and board-level certifications. As you work through what may seem to be a nuisance remember the primary objectives. These are saving money and reducing carbon emissions. Contact Ecovaro if we can assist in any way.

Making Click-and-Collect click

In my previous post, I introduced you to integrated e-commerce and explained why it is the right way to extend your business online. If you already have a brick-and-mortar retailing business and you’re looking to improve your online presence, you could start offering a click-and-collect service.

With click-and-collect, customers order online and then collect their merchandise from one of the retailer?s local branches. Why would they want to do that?

Apparently, there are buyers who now prefer a click-and-collect service over the delivery service of a purely online retailer. With the latter, they sometimes have to wait forever for the delivery van to arrive or contend with a missed-delivery card.

Basically, customers who want both the convenience of placing orders online and better control of their time find click-and-collect a better option.

Last December 2011, IMRG (Interactive Media in Retail Group) reported a ?significant rise in the percentage of click-and-collect e-retail sales in the 3rd quarter of 2011?. This accounted for 10.4% of all e-retail sales in that quarter. More specifically, the gain was 7.4%, which was also the strongest quarterly gain since IMRG started collecting this data.

Clearly, this particular service is gaining popularity. But how do you meet the rising demand in this area?

A click-and-collect service requires a highly synchronised ecosystem. You don’t want to have a customer order items from your online store, drive a couple of minutes from his house to your nearest outlet, only to find out that one of the items is no longer available.

This can only work if all systems involved are interconnected. Changes in the inventory in your individual outlets should reflect on your database in real time. In turn, these changes have to be reflected instantly on your online store. Conversely, once a buyer has picked items online and is already directed to a local outlet, those items have to be reserved there.

But that’s not all. Your system has to be seamless enough to support fast and reliable service. You don’t want your buyer to have to wait a long time before the items are ready for pick-up. It also has to be capable of tracking the status of ordered products, handling uncollected orders, and monitoring inventory.

By implementing an integrated e-commerce system, these won’t be the only things you?d be able to do. You can even add more value to your service. For example, you can connect to your CRM and learn more about your customers? purchase history, buying habits, and preferences.

That way, it would be easier for you to provide a faster and more convenient buying experience for them in the future.

Click-and-collect is a very promising way to increase your sales and improve customer loyalty.

Ready to work with Denizon?

Contact Us Today