Sources of Carbon Emissions

Exchange of carbon dioxide among the atmosphere, land surface and oceans is performed by humans, animals, plants and even microorganisms. With this, they are the ones responsible for both producing and absorbing carbon in the environment. Nature?s cycle of CO2 emission and removal was once balanced, however, the Industrial Revolution began and the carbon cycle started to go wrong. The fact is that human activities substantially contributed to the addition of CO2 in the atmosphere.

According to statistics gathered by the Department of Energy and Climate Change, carbon dioxide comprises 82% of UK?s greenhouse gas emissions in 2012. This makes carbon dioxide the main greenhouse gas contributing to the pollution and subsequent climate change in UK.

Types of Carbon Emissions

There are two types of carbon emissions ? direct and indirect. It is easier to measure the direct emissions of carbon dioxide, which includes the electricity and gas people use in their homes, the petrol burned in cars, distance of flights taken and other carbon emissions people are personally responsible for. Various tools are already available to measure direct emissions each day.

Indirect emissions, on the other hand, include the processes involved in manufacturing food and products and transporting them to users? doors. It is a bit difficult to accurately measure the amount of indirect emission.

Sources of Carbon Emissions

The sources of carbon emissions refer to the sectors of end-users that directly emit them. They include the energy, transport, business, residential, agriculture, waste management, industrial processes and public sectors. Let’s learn how these sources contribute carbon emissions to the environment.

Energy Supply

The power stations that burn coal, oil or gas to generate electricity hold the largest portion of the total carbon emissions. The carbon dioxide is emitted from boilers at the bottom of the chimney. The electricity, produced from the fossil fuel combustion, emits carbon as it is supplied to homes, commercial establishments and other energy users.

Transport

The second largest carbon-emitting source is the transport sector. This results from the fuels burned in diesel and petrol to propel cars, railways, shipping vehicles, aircraft support vehicles and aviation, transporting people and products from one place to another. The longer the distance travelled, the more fuel is used and the more carbon is emitted.

Business

This comprises carbon emissions from combustion in the industrial and commercial sectors, off-road machinery, air conditioning and refrigeration.

Residential

Heating houses and using electricity in the house, produce carbon dioxide. The same holds true to cooking and using garden machinery at home.

Agriculture

The agricultural sector also produces carbon dioxide from soils, livestock, immovable combustion sources and other machinery associated with agricultural activities.

Waste Management

Disposing of wastes to landfill sites, burning them and treating waste water also emit carbon dioxide and contributes to global warming.

Industrial Processes

The factories that manufacture and process products and food also release CO2 , especially those factories that manufacture steel and iron.

Public

Public sector buildings that generate power from fuel combustion also add to the list of carbon emission sources, from heating to other public energy needs.

Everybody needs energy and people burn fossil fuels to create it. Knowing how our energy use affects the environment, as a whole, enables us to take a step ahead towards achieving better climate.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Check our similar posts

Implementing Large-Scale Complex Business Change

Sometimes, driving your people to work harder is not enough for your organisation to withstand the pressures laying siege to it. With uncertain economic conditions, unpredictable fresh competition, and looming threats from the environment or even pandemic-grade diseases, empowering your people to not only ‘think’ but also to ‘step’ out of the box is currently the name of the game.

However, such initiatives typically require sweeping changes throughout your entire organisation … and to think even the slightest change is often met with hard resistance.

Whether you’re about to undergo an M&A, relocate due to a major catastrophe, scale down to a skeletal workforce, or implement a brand-new company-wide strategy, our systematic approach to large-scale complex business change can help you make the transition as seamless as possible.

We understand the importance of the human aspect in change management. That is why we’ll focus on making your people appreciate the benefits of having to learn new skills, perform new tasks, employ modern technologies, and go through new processes in order to tone down the resistance level.

Our entire process spans from top to bottom, wherein we’ll start with your sponsors, down to your managers, and then to other stakeholders in making them appreciative of the needed changes and in order to achieve alignment with your organisation’s goals. Our top to bottom approach is also aimed at casting a positive “shadow of the leader” on people down the line, enabling them with an optimistic view despite the gruelling tasks before them.

We invite you to have a look at the steps we take in implementing large-scale complex business change to win over a strong and lasting commitment to it.

Evaluating the Required Change

Large-scale complex business change initiatives can be implemented expeditiously and economically if you’ve clearly defined the scope of the change as well as the forces that shape your organisation. You’ll want to know which areas yield easily and which are hard to change to determine where and how you’re going to focus more of your efforts on.

To arrive at a sound and systematic plan, we first gather as much information as needed and analyse them. We determine whether your departments have the required capabilities and how we can arrive at a clear organisational alignment. That way, we don’t waste time, effort and resources when the moment comes to carry out the plan.

These are some of the diagnostic procedures we perform in evaluating the required change.

  • Change complexity analysis. We’ll assess the contribution of people and task factors to the overall complexity of the change project. This will help us determine how to approach the problem efficiently.
  • Causal analysis. By establishing cause and effect relationships, we can identify root or circular causes. This will allow us to pinpoint problem areas and prevent a repetition of past mistakes.
  • Structural analysis. Any company is propped up by a number of structures: organisational, process, motivational, social, and physical, among others. Understanding the structures that drive, motivate, hamper, connect, and influence your people’s behaviours can provide insights as to how or where structural change can best be executed.
  • Context analysis. We’ll look into market forces as well as political, economic, social, technological, legal, and environmental factors enveloping your business. We’ll also analyse your driving objectives, organisational alignment, and organizational capabilities. By analysing the internal and external environment in which your business currently operates, we can formulate a customised strategic and effective plan of action.

Managing Stakeholders

Change initiatives won’t prosper without total commitment from all stakeholders. Stakeholders refer to people in your organisation who either have interests in the change project or can be affected by it.

We deal with your stakeholders starting from the top because if we can’t gain full commitment from those already in the best position to spur the diverse entities in your company into active cooperation, striving to secure commitment from other areas will be futile.

That is, if you don’t have the full support of your key and principal sponsors, i.e. the people who have the biggest say and have greatest control over resources in your organisation, you can’t hope to sustain the change endeavour, let alone provide the much needed spark to get it started.

Here’s how we carry out our stakeholder management actions.

  • Conduct research to identify all stakeholders: the sponsors, your internal and external partners, the main targets of the change, and all interested parties. That way you can “switch on” implementors of each change action in the proper sequence.
  • Not everyone will offer resistance to your change endeavours. We’ll help you identify those stakeholders and sponsors who are willing to offer support, evaluate the level of support they are willing to give, harness all available supports and utilise them extensively to benefit the change.
  • Gain a deeper understanding as to why certain stakeholders are willing to lend support. In doing so, we can implement the right strategies that will encourage them to continue supporting you.
  • Assemble a leadership team that will champion your change initiatives. We’ll facilitate effective collaboration among its team members, transforming them into a cohesive force designed to carry out plans and motivate everyone else down the line.
  • Upon realisation of the change project, we’ll see to it that all stakeholders get a taste of the carrot at the end of the stick. This will encourage them to continue active cooperation in future change initiatives.

Planning for the Change

Anyone who has experienced having their car stuck in the mud knows that stepping on the accelerator will only get the vehicle trapped even deeper. Without the aid of a towing truck, getting the car out will require careful planning since different combinations of pulling, pushing, lifting, rocking to-and-fro, and stepping on the accelerator may be needed.

Of course, some combinations are just better than others. The same principle holds when effecting change.

Our approach to change management typically varies depending upon the information we obtain from the different analyses performed earlier. For instance, since not all organisations are suitable for a collaborative approach, we will employ either collaborative, consultative, directive, or coercive change management strategies wherever applicable.

A well-planned change will result in a smoother, less costly, and less disruptive transition. Here’s how we’ll help you plan your change initiatives.

  • When put in a predicament similar to the car-in-the-mud, the basic strategy entails identifying the current resisting forces and predicting what other resisting forces may be encountered along the way. After researching and pointing out your organisation’s resistance forces, we’ll lay out the most appropriate facilitation, education, and negotiation techniques.
  • To bring down wastage to the lowest possible levels, we’ll engineer a change delivery plan that involves the most cost-effective sequence of driver, process, technology, organisational, and people alignment.
  • To win and maintain a high level of trust, confidence and commitment from all sponsors and stakeholders, we’ll present a clear road map of the change process as well as landmarks that will prove how far we will have gone. These landmarks will then be brought to each sponsor’s and stakeholder’s attention each time they are arrived at in order to build up assurance and continued commitment.
  • We’ll design measurement tools and schedule reporting deadlines so that you’ll know what to look forward to and when to expect them.

Managing the Change

Your company will hold a better chance of maintaining a sizeable lead over the rest of the pack if you constantly establish a rally point and instil in your stakeholders the drive to rally to that point from the get-go. To make this happen, your company must undertake the unfreezing, transition, and refreezing phases of change skilfully in order to bring all stakeholders into the right mindset.

Our specialists’ systematic and efficient methods for each of these phases are designed to simplify the management of each phase as well as provide a seamless shift from one phase to the next. This is what we’ll do:

  • Set up a change project management office to ensure that everything associated with the change initiative is given the needed attention and resources even while all the other usual processes in your organisation run concurrently.
  • To unfreeze your people and get them started on the road of change, we’ll employ unfreezing techniques wherever they are most appropriate. We’ll resort to different kinds of methods ranging from presenting persuasive evidence justifying the need for change to showing a motivational vision for inspiring your people to embark on the change process.
  • Since it is during the transition phase when your people can find themselves groping in the dark, we’ll offer executive coaches for your senior managers; facilitators to provide guidance during team meetings and other change activities; coaches to educate and inspire them to meet the change with the right attitude; trainers to teach new systems, procedures, and technologies; as well as employ a variety of other techniques in order to make the transition phase as seamless as possible.
  • Although your people should always be ready to undertake the next major change after a previous one, there should be points in between where they can taste the spirit of success, establish a temporary base to rejuvenate, and immediately gain a deeper understanding of the nearby terrain so as to envision the next rally point. We’ll see to it that this vital phase of change is carried out completely.
What Heijunka is & How it Smooths Call Centre Production

The Japanese word Heijunka, pronounced hi-JUNE-kuh means ?levelling? in the sense of balancing workflows. It helps lean organizations shift priorities in the face of fluctuating customer demand. The goal is to have the entire operation working at the same pace throughout, by continuously adjusting the balance between predictability, flexibility, and stability to level out demand.

Henry Ford turned the American motor manufacturing industry upside down by mass-producing his iconic black motor cars on two separate production lines. In this photograph, body shells manufactured upstairs come down a ramp and drop onto a procession of cars almost ready to roll in 1913.

Smoothing Production in the Call Centre Industry

Call Centres work best in small teams, each with a supervisor to take over complex conversations. In the past, these tended to operate in silos with each group in semi-isolation representing a different set of clients. Calls came through to operators the instant the previous ones concluded. By the law of averages, inevitably one had more workload than the rest at a particular point in time as per this example.

Modern telecoms technology makes it possible to switch incoming lines to different call centre teams, provided these are multi-skilled. A central operator controls this manually by observing imbalanced workflows on a visual system called a Heijunka Box. The following example comes from a different industry, and highlights how eight teams share uneven demand for six products.

This departure from building handmade automobiles allowed Henry to move his workforce around to eliminate bottlenecks. For example, if rolls of seat leather arrived late he could send extra hands upstairs to speed up the work there, while simultaneously slowing chassis production. Ford had the further advantage of a virtual monopoly in the affordable car market. He made his cars at the rate that suited him best, with waiting lists extending for months.

A Modern, More Flexible Approach

Forces of open competition and the Six Sigma drive for as-close-to-zero defects dictates a more flexible approach, as embodied in this image published by the Six Sigma organisation. This represents an ideal state. In reality, one force usually has greater influence, for example decreasing stability enforces a more flexible approach.

Years ago, Japanese car manufacturer Toyota moved away from batching in favour of a more customer-centric approach, whereby buyers could customise orders from options held in stock for different variations of the same basic model. The most effective approach lies somewhere between Henry Ford?s inflexibility and Toyota?s openness, subject to the circumstances at the moment.

A Worked Factory Example

The following diagram suggests a practical Heijunka application in a factory producing three colours of identical hats. There are two machines for each option, one or both of which may be running. In the event of a large order for say blue hats, the company has the option of shifting some blue raw material to the red and green lines so to have the entire operation working at a similar rate.

Predictability, Flexibility, and Stability at Call Centre Service

The rate of incoming calls is a moving average characterised by spikes in demand. Since the caller has no knowledge whether high activity advisories are genuine, it is important to service them as quickly as possible. Lean process engineering provides technology to facilitate flexibility. Depending on individual circumstances, each call centre may have its own definition of what constitutes an acceptably stable situation.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
ESOS Facts on a Page

The UK?s ESOS energy saving program stands for ?Energy Savings Opportunity Scheme?. Its purpose is to reduce demand – and hence fossil-based pollution at both ends of the supply chain. It currently applies to large UK companies only. However its guidelines are also valuable input to smaller firms voluntarily going greener.

The program threshold is 250 employees and / or turnover or at least ?UK50 million. This affects approximately 9,000 UK firms, with others below the threshold wondering whether the government plans to lower it. In essence, ESOS requires that qualifying businesses complete comprehensive audits of energy use and opportunities at least every fourth year.

The plan is carrot and stick. Compliant companies will probably uncover significant savings when they stop and measure. They may even unearth carbon credits they can sometime exchange for cash. Reactionary firms who try to duck the issue will feel Her Majesty?s wrath through stiff penalties. In time, they may find it harder to attract investors. If ESOS affects your company, then the wise thing could be complying by the first deadline of 5 December 2015.

To do so, you must conduct an energy audit and report it to the UK Environment Agency. This comprises

  1. Measuring total energy use across processes, transport and facilities
  2. Pie charting 90% of this to identify areas that are energy intensive
  3. Singling out cost-effective energy-saving projects in high use areas
  4. Submitting your report to the Environment Agency ahead of the deadline

ecoVaro recommends affected companies do not leave this to the last minute. While having ISO 50001 may exempt some from ESOS, the regulations are far from straightforward and it will take months to reach complete clarification. We would like to suggest a more balanced approach.

ESOS is a wonderful incentive to save energy costs while contributing to a better future for the kids. The Energy Savings Opportunity Scheme is precisely that. The cost of energy has crept up on us to the extent that we have to do something, government or no government.

Measuring energy consumption is as simple as installing meters at critical points in the flow, and you probably have many of them anyway. Once you have your data you no longer have to crunch the numbers. ecoVaro can do this for you and return the result in the form of handy graphs and spreadsheets.

Ready to work with Denizon?