ecoVaro to tackle water stress

For many people within the UK, water is not really something to worry about. Surely enough of it falls out the sky throughout the year that it does feel highly unlikely that we?ll ever run out of it. There certainly does seem to be an abundance of Branded Water available in plastic bottles on our supermarket shelves.

Water, water, every where,
And all the boards did shrink;
Water, water, every where,
Nor any drop to drink.

The Rime of the Ancient Mariner ? Samuel Taylor Coleridge

Despite this, Once-unthinkable water crises are becoming commonplace.  If you consider that In England and Wales, we use 16 billion litres of clean drinking water every day ? that’s equivalent to 6,400 Olympic sized swimming pools.

Currently, water companies can provide slightly more than we need ? 2 billion litres are available above and beyond what we’re using.  In some areas, though, such as south east England, there is no surplus and, as such, these regions are more likely to face supply restrictions in a dry year.

If we take little moment to reflect on some of the most notable water related stories over the past few years, we’ll start to get a picture of just how real the potential and the threat of water shortages can be.

Reservoirs in Chennai, India?s sixth-largest city, are nearly dry right now. Last year, residents of Cape Town, South Africa narrowly avoided their own Day Zero water shut-off.

It was only year before that, Rome rationed water to conserve scarce resources.

Climate change is likely to mean higher temperatures which may drive up the demand for water (alongside population growth) and increase evaporation from reservoirs and water courses during spring and summer.

The impact of climate change on total rainfall is uncertain, but the rain that does fall is likely to arrive in heavier bursts in winter and summer. Heavier rain tends to flow off land more quickly into rivers and out to sea, rather than recharging groundwater aquifers.

A greater chance of prolonged dry periods is also conceivable.  This combined with the harsh reality that no human population can sustain itself without sufficient access to fresh water.

If present conditions continue, 2 out of 3 people on Earth will live within a water-stressed zone by 2025

What is water stress?

Water stress is a term used to describe situation when demand for water is greater than the amount of water available at a certain period in time, and also when water is of poor quality and this restricts its usage. Water stress means deterioration in both the quantity of available water and the quality of available water due to factors affecting available water.

Water stress refers to the ability, or lack thereof, to meet human and ecological demand for water. Compared to scarcity, water stress is a more inclusive and broader concept.

Water Stress considers several physical aspects related to water resources, including water scarcity, but also water quality, environmental flows, and the accessibility of water.

Supply and Demand

Major factors involved when water scarcity strikes is when a growing populations demand for water exceeds the areas ability to service that need.

Increased food production and development programs also lead to increased demand for water, which ultimately leads to water stress.

Increased need for agricultural irrigation in order to produce more crops or sustain livestock are major contributors to localised water stress.

Overconsumption

The demand for water in a given population is fairly unpredictable.  Primarily, based on the fact that you can never accurately predict human behaviour and changes in climate.

If too many people are consuming more water than they need because they mistakenly believe that water is freely available and plentiful, then water stress could eventually occur.

This is also linked to perceived economic prosperity of a give region.  Manufacturing demand for water can have huge impact regardless whether water is actively used within the manufacturing process or not.

Water Quality

Water quality in any given area is never static.  Water stress could happen as a result of rising pollution levels having a direct impact on water quality.

Water contamination happens when new industries either knowingly or unknowingly contaminate water with their industrial practices.

Largely, this can happen and frequently does so because these industries do not take effective control of monitoring and managing their impact on communal water supplies.  Incorrectly assuming this is the responsibility of an additional third party like the regional water company.

The truth is, water quality and careful monitoring of it is all of our responsibility.

Water Scarcity

Simple increases in demand for water can in itself contribute to water scarcity. However,  these are often preceded by other factors like poverty or just the natural scarcity of water in the area.

In many instances, the initial locations of towns or cities were not influenced by the close proximity of natural resources like water, but rather in pursuit of the extraction of other resources like Gold, Coal or Diamonds.

For Instance, Johannesburg,  South Africa is the largest City in South Africa and is one of the 50 largest urban areas in the world. It is also located in the mineral rich Witwatersrand range of hills and is the centre of large-scale gold and diamond trade.

Johannesburg is also one of the only major cities of the world that was not built on a river or harbour.   However, it does have streams that contribute to two of Southern Africas mightiest rivers – Limpopo and the Orange rivers.  However, most of the springs from which many of these streams emanate are now covered in concrete!

Water Stress and Agriculture

Peter Buss, co-founder of Sentek Technology calls ground moisture a water bank and manufactures ground sensors to interrogate it. His hometown of Adelaide is in one of the driest states in Australia. This makes monitoring soil water even more critical, if agriculture is to continue. Sentek has been helping farmers deliver optimum amounts of water since 1992.

The analogy of a water bank is interesting. Agriculturists must ?bank? water for less-than-rainy days instead of squeezing the last drop. They need a stream of real-time data and utilize cloud-based storage and processing power to curate it.

Sentek?s technology can be found in remote places like Peru?s Atacamba desert and the mountains of Mongolia, where it supports sustainable floriculture, forestry, horticulture, pastures, row crops and viticulture through precise delivery of scarce water.

This relies on precision measurement using a variety of drill and drop probes with sensors fixed at 4? / 10cm increments along multiples of 12? / 30cm up to 4 times. These probe soil moisture, soil temperature and soil salinity, and are readily repositioned to other locations as crops rotate.

Peter Buss is convinced that measurement is a means to an end and only the beginning. ?Too often, growers start watering when plants don’t really need it, wasting water, energy, and labour. By accurately monitoring water can be saved until when the plant really needs it.

Peter also emphasises that crop is the ultimate sensor, and that ?we should ask the plant what it needs?.

This takes the debate a stage further. Water wise farmers should plant water-wise crops, not try to close the stable door after the horse has bolted and dry years return.

The South Australia government thinks the answer also lies in correct farm dam management. It wants farmers to build ones that allow sufficient water to bypass in order to sustain the natural environment too.

There is more to water management than squeezing the last drop. Soil moisture goes beyond measuring for profit. It is about farming sustainably using data from sensors to guide us.

Ecovaro is ahead of the curve as we explore imaginative ways to exploit the data these provide for the common good of all.

A Quarter of the World?s Population, Face High Water Stress

Data from WRI?s Aqueduct tools reveal that 17 countries ? home to one-quarter of the world?s population?face ?extremely high? levels of baseline water stress, where irrigated agriculture, industries and municipalities withdraw more than 80% of their available supply on average every year. 

Water stress poses serious threats to human lives, livelihoods and business stability. It’s poised to worsen unless countries act: Population growth, socioeconomic development and urbanization are increasing water demands, while climate change can make precipitation and demand more variable.  

How to manage water stress

Water stress is just one dimension of water security. However, like any challenge, its outlook depends on adequate monitoring and management of environmental data.

Even countries with relatively high water stress have effectively secured their water supplies through proper management by leveraging the knowledge they have garnered by learning from the data they gathered.

3 ways to help reduce water stress

In any geography, water stress can be reduced by measures ranging from common sense to innovative technology solutions.

There are countless solutions, but here are three of the most straightforward:

1. Increase agricultural efficiency: The world needs to make every drop of water go further in its food systems. Farmers can use seeds that require less water and improve their irrigation techniques by using precision watering rather than flooding their fields.

Businesses need to increase investments to improve water productivity, while engineers develop technologies that improve efficiency in agriculture.

Consumers can reduce food loss and waste, which uses one-quarter of all agricultural water.

2. Invest in grey and green infrastructure:  D Data produced by Aqueduct Alliance  –  shows that water stress can vary tremendously over the year.  WRI and the World Bank?s research shows that built infrastructure (like pipes and treatment plants) and green infrastructure (like wetlands and healthy watersheds) can work in tandem to tackle issues of both water supply and water quality.

3. Treat, reuse and recycle:  We need to stop thinking of wastewater as waste.

Treating and reusing it creates a ?new? water source.

There are also useful resources in wastewater that can be harvested to help lower water treatment costs. For example, plants in Xiangyang, China and Washington, D.C. reuse or sell the energy- and nutrient-rich byproducts captured during wastewater treatment.

Summary

The data is undeniably clear, there are very worrying trends in water.

Businesses and other other organisations need to start taking action now and investing in better monitoring and management, we can solve water issues for the good of people, economies and the planet. We collectively cannot kick this can down the road any further, or assume that this problem will be solved by others.

It is time, for a collective sense of responsibility and for everyone to invest in future prosperity of our Planet as a collective whole.  Ecological preservation should be at the forefront of all business plans because at the end of the day profit is meaningless without an environment to enjoy it in!

Check our similar posts

Data Leakage Prevention – Protecting Sensitive Information

When DuPont lost $400 million in intellectual property, it wasn’t because a hacker from the other side of the world infiltrated their system. The information was simply stolen by a former employee. Alarmingly, data loss incidents are not always caused by deliberate actions.

A file containing personal information accidentally attached to an email and sent to multiple recipients; financial data stored in a USB pen drive, accidentally left in a restaurant; or bank account data of colleagues, inadvertently posted on a company website – these are also some of the everyday causes of data loss.

A report done by research company Infowatch regarding global data leaks in 2010 showed that there were actually more accidental data leaks in that year compared to intentional ones. Accidental leaks comprised 53%, while intentional leaks comprised 42% (the rest were unidentified).

But even if they ?only? happened accidentally, breach incidents like these can still be very costly. The tens of thousands of dollars that you could sometimes end up paying in civil penalties (as in the case when you lose other people?s personal information) can just be the beginning. More costly than this is the loss of customer and investor confidence. Once you lose those, you could consequently lose a considerable portion of your business.

Confidential information that may already be leaking out right under your nose

With all the data you collect, process, exchange, and store electronically every day, your IT system has surely now become a storehouse of sensitive information. Some of them, you may be even taking for granted.

But imagine what would happen if any of the following trade secrets fell into the wrong hands: marketing plans, confidential customer information, pricing data, product development strategies, business plans, supplier information, source codes, and employee salaries.

These are not the only kind of data that you should be worried about. You could also get into trouble if your sloppy IT security fails to protect employee or client personal information such as their names; social security numbers; drivers license numbers; or bank account numbers and credit/debit card numbers along with their corresponding PINs.

In some countries, you could face onerous data breach notification requirements and heavy fines when these kind of data are involved.

There are now more holes to plug

It’s not just the different varieties of sensitive electronic information that you have to worry about. Because these data can take on different forms, i.e. data-at-rest, data-in-motion, and data-at-the-endpoints, you also need to take aim at different areas in your IT system.

Sensitive information can be found ?at rest? in each of your employees? hard disks, in your servers, storage disks, and in off-site backup disks. They can also be found ?in motion? in email, instant messaging, social networking messaging, P2P file sharing, ftp, http, and so on.

That’s not all. Your highly mobile workforce may have already introduced yet another high-risk area into your system: data-at-the-endpoints. This includes USB flash-disks, laptops, portable hard disks, CDs, and even smartphones.

The main challenge of data leak prevention

Having been made aware of the various aspects of data leakage, have you already come to grips with the extent of the task at hand?

There are two major things you need to do here to prevent data leakage.

One, you need to identify what data you have that can be considered as sensitive/confidential information. Of course you have financial information and employee salaries in your files. But do you also store personally identifiable information? Do you have trade secrets that are stored in electronic form?

Two, you need to pinpoint their locations. Are they only on your hard disks and laptops? Or have they made their way to flash drives, CDs/DVDs, or portable HDDs? Are they being transmitted through email or any other file transfer media?

The reason why you need to know what your sensitive data are as well as where they are is because you would like all efforts of securing them to be as efficient and unobtrusive as possible.

Let’s say, as a way of protecting your data, you decide to implement encryption. Since encryption can consume a lot of storage space and significantly reduce performance, it may be impractical to encrypt your entire database or all your files. For the same reason, you wouldn’t want to encrypt every single email that you send.

Thus, the best way would be to encrypt only the data that really need encryption. But again, you need to know what data needs to be encrypted and where those data can be found. That alone is no simple task.

Not only will you need to deal with the data you already have, you will also have to worry about the data that will go through your systems during the course of your day-to-day transactions.

Identifying sensitive data as it enters or leaves your system, goes through your network, or gets stored in your file system or database, and then applying the necessary security actions should be done automatically and intelligently. Otherwise, you could end up spending on a lot of man-hours or, worse, wasting them on a lot of false positives and negatives.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Energy Audit – clearly clear?

An energy audit is an examination of an energy system to ensure that energy is being used efficiently. It is the inspection, survey and analysis of energy flows for energy conservation in a building. Energy audits can be conducted by building managers who examine the energy account of an energy system, checks the way energy is used in its various components, checks for areas of inefficiency or where less energy can be used, and identifies the means for improvement.

An energy audit is often used to identify cost effective ways to improve the comfort and efficiency of buildings. In addition, homes/ enterprises may qualify for energy efficiency grants from central government. Energy audits seek to prioritise the energy uses from the greatest to least cost effective opportunities for energy savings.

An energy audit is an effective energy management tool. By identifying and implementing improvements as identified, savings can be achieved not only on energy bills, but also equipment will be able to attain a longer life under efficient operation. All these mean actual dollar savings.

An energy audit has to be conducted by a competent person with adequate technical knowledge on building services installations, after which he/she comes up with a report recommending plans on the Energy Management Opportunities (EMO) for energy saving.

An energy audit culminates to a written report. This could show energy use for a given time period (for example a year) and the impact of any suggested improvements per year. Energy audit reports are then used to identify cost effective ways to improve the comfort and efficiency of buildings. The energy audit report therefore gives management an understanding of the energy consumption scenario and energy saving plans formulation.
Energy audit reports should always translate into action. No matter how well articulated, the energy management objectives are afterall, an energy audit (EMOs), all the effort will be futile if no action is taken. The link between the audit and action is the audit report. It is therefore important for the audit reports to be understandable for all the target audiences/ readers, all of whom may have diverse needs, hence the reason why they should be clear, concise and comprehensible.

What are the do?s and don’ts when writing energy audit reports?

Avoid technical jargon as much as possible; present information graphically; use different graphics such as pie charts, data tables. Schematics of equipment layouts and digital photos tend to make EMO reports less dry. Some of the energy audit software?s come in handy in the generation of such graphs and charts.
The climax of it all is the recommendations, which should be made very fascinating.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Article 8 of the EU Energy Efficiency Directive ? Orientation

Following in-depth discussion of the UK?s ESOS response, we decided to backtrack to the source, especially since every EU member is facing similar challenges. The core purpose of the directive is to place a pair of obligations on member states. These are

  1. To promote the availability of energy audits among final customers in all sectors, and;
  2. To ensure that enterprises that are not SMEs carry out energy audits at least every four years.

Given the ability for business to look twice at every piece of legislation it considers unproductive, the Brussels legislators took care to define what constitutes an enterprise larger than an SME.

Definition of a Large Undertaking

A large undertaking meets one or both of the following conditions:

  1. It employs 250 or more people
  2. Its annual turnover is more than ?50 million and its balance sheet total exceeds ?43 million

Rules for Energy Audits

If accredited / qualified in-house specialists are unavailable then independent experts should supervise audits. The talent shortage seems common to many EU businesses. In hindsight, the Union could have ramped up slower, especially since the first compliance date of 5 December 2015 does not leave much swing room.

ecoVaro doubts there was a viable alternative, given the urgent imperative to beat back the scourge of carbon that is threatening the viability of our planet. The legislators must have been of a similar mind when laying down the guidelines. Witness for example the requirement that penalties be ?effective, proportionate and dissuasive?.

In order to be compliant, an energy audit must

  1. Be based on twelve months of verifiable data that is
    • over a continuous period beginning no more than 24 months before the beginning of the energy audit, and;
    • identifies energy saving opportunities including paths to their achievement
  2. Analyse the participant’s energy consumption and energy efficiency
  3. Have not been used as the basis for an energy audit in a previous compliance period

Measurement of current status and progress tracing are at the core of energy saving and good governance generally. EcoVaro has a powerhouse of software tools available on the cloud to help project teams save time and money.

Ready to work with Denizon?