Check our similar posts

How Mid-South Metallurgical cut Energy Use by 22%

Mid-South in Murfreesboro, Tennessee operates a high-energy plant providing precision heat treatments for high-speed tools – and also metal annealing and straightening services. This was a great business to be in before the energy crisis struck. That was about the same time the 2009 recession arrived. In no time at all the market was down 30%.

Investors had a pile of capital sunk into Mid-South?s three facilities spread across 21,000 square feet (2,000 square meters) of enclosed space. Within them, a number of twenty-five horsepower compressors plus a variety of electric, vacuum and atmospheric furnaces pumped out heat 27/7, 52 weeks a year. After the company called in the U.S. Department of Energy for assistance, several possibilities presented.

Insulate the Barium Chloride Salt Baths

The barium chloride salt baths used in the heat treatment process and operating at 1600?F (870?C) were a natural choice, since they could not be cooled below 1200?F (650?C) when out of use without hardening the barium chloride and clogging up the system. The amount of energy taken to prevent this came down considerably after they covered and insulated them. The recurring annual electricity saving was $53,000.

Manage Electrical Demand & Power

The utility delivers 480 volts of power to the three plants that between them consume between 825- and 875-kilowatt hours depending on the season. Prior to the energy crisis Mid-South Metallurgical regarded this level of consumption as a given. Following on the Department of Energy survey the company replaced the laminar flow burner tips with cyclonic burner ones, and implemented a number of other modifications to enhance thermal efficiency further. The overall natural gas reduction was 20%.

Implement Large Scale Site Lighting Upgrade

The 24/7 nature of the business makes lighting costs a significant factor. Prior to the energy upgrade this came from 44 older-type 400-watt metal halide fixtures. By replacing these with 88 x 8-foot (2.5 meter) fluorescent fittings Mid-South lowered maintenance and operating costs by 52%

The Mid-South Metallurgical Trophy Cabinet

These three improvements cut energy use by 22%, reduced peak electrical demand by 21% and brought total energy costs down 18%. Mid-South continues to monitor energy consumption at each strategic point, as it continues to seek out even greater energy efficiency in conjunction with its people.

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK
Field service and its impact on your bottom line

There are many pointers to successful field service in any business. Generally, labour hours, parts, technician efficiency, performance indicators and other bunch of data are the most important. However, the icing on top is the total revenue. If you are in business, you must be cocksure that it’s making money, and when you don’t rake in enough you need to make some business decisions quick!

For the most part, field service companies will always have a field service management software to handle all the data. But how will this affect your outlook? 

Will this cause a direct increase in revenue? 

What will still need to be changed so that the ship stays afloat?

Increase your service jobs

As expected, the best field management software will guarantee a positive increase in appointments per week. On average, the field service team should expect at least a 50% increase in work turnover. There is a direct relation between the revenue you should be making and the number of calls in your schedule since the only way of making more cash is to get more work done. It is not recommended to raise costs because it increases the risk of losing customers easy when they can’t meet the extra expense. Field service software will help you bring in more customers and also manage technicians.

If you have much of the hard work done for you then you?d have more time to run the show. This is why premises are trying out software because they answer many problems like:

  • Automation and improved work order management
  • Fast dispatch from an array of drag-drop scheduling tools
  • Easy-to-use field service apps for technicians to receive and submit work orders
  • Can be integrated into account systems for faster billing time

Manual operations are costly and prone to error, and they don’t come cheap. Do away with them, reduce costs, sit back and watch as new customers steadily stream in. Grow the business by building lasting relations with your workforce and customers.

Increase technician?s abilities with mobile

If you want to get more profit, bank on technicians who complete service calls. Their task is obviously the hardest. They have an unpredictable job; at times they need to come up with quick responses or they may also be required to dig deep as well. The work does not need to be slowed with an endless paper trail while they could be elsewhere giving their all. These technicians require a working mobile field service management app.

As expected, field service leaders who use a mobile field service software report close to 20% increase in service visits per technician. This translates to each technician taking nearly a fifth more calls in a day. And as we had said before, more service calls can double the profits. How can technicians get extra time from a field service mobile app?

  • No need to drive to work to pick orders
  • Less time using the phone looking for service or parts information
  • Reduces the time needed to go through paper-based work
  • Less time driving to service calls because information is routed to their mobile phones

Increase revenue from technicians

If time is spent seamlessly, dispatchers will find time in a technician?s schedule for an extra service call. With all this being done within normal working hours, the business stands to increase its bottom line. This is what makes the business grow. Not by increasing technicians but by optimum utilisation of the current staff to get maximum profit. The logic is straightforward ? a technician working 8 hours each day taking six calls a day will make more revenue than the one who takes four, because they are paid the same each, but the business benefits from the extra service calls.


The business stands to make more revenue per technician if it uses field service management software. The margins can go as high as 40% because the technician has all tools needed to get the job done faster. You increase revenue from field work too. Let technicians benefit from automated process and have all the tools for work that they need right on their mobile devices.

The target is always your bottom line

When field service leaders inquire about field service software, they need to know how it affect the bottom line: how they will spend less time drafting schedules, how each technician will increase revenue, how the business will grow. Simple as that!
Field service management applications bring a lot to the table. 

Don’t waste your time crunching a lot of numbers or sorting out schedules since this is what such an application should do. Automation, optimisation and mobility are all ways of increasing revenue. Let us help you reach your goals using our top shelf field management software. This will not only help your bottom line but will let you have more time to venture into untapped potentials.

What Sub-Metering did for Nissan in Tennessee

When Nissan built its motor manufacturing plant in Smyrna 30 years ago, the 5.9 million square-foot factory employing over 8,000 people was state of art. After the 2005 hurricane season sky-rocketed energy prices, the energy team looked beyond efficient lighting at the more important aspect of utility usage in the plant itself. Let’s examine how they went about sub-metering and what it gained for them.

The Nissan energy team faced three challenges as they began their study. They had a rudimentary high-level data collection system (NEMAC) that was so primitive they had to transfer the data to spread-sheets to analyse it. To compound this, the engineering staff were focused on the priority of getting cars faster through the line. Finally, they faced the daunting task of making modifications to reticulation systems without affecting manufacturing throughput. But where to start?

The energy team chose the route of collaboration with assembly and maintenance people as they began the initial phase of tracking down existing meters and detecting gaps. They installed most additional equipment during normal service outages. Exceptions were treated as minor jobs to be done when convenient. Their next step was to connect the additional meters to their ageing NEMAC, and learn how to use it properly for the first time.

Although this was a cranky solution, it had the advantage of not calling for additional funding which would have caused delays. However operations personnel were concerned that energy-saving shutdowns between shifts and over weekends could cause false starts. ?We’ve already squeezed the lemon dry,? they seemed to say. ?What makes you think there?s more to come??

The energy team had a lucky break when they stumbled into an opportunity to prove their point early into implementation. They spotted a four-hourly power consumption spike they knew was worth examining. They traced this to an air dryer that was set to cyclical operation because it lacked a dew-point sensor. The company recovered the $1,500 this cost to fix, in an amazing 6 weeks.

Suitably encouraged and now supported by the operating and maintenance departments, the Smyrna energy team expanded their project to empower operating staff to adjust production schedules to optimise energy use, and maintenance staff to detect machines that were running without output value. The ongoing savings are significant and levels of shop floor staff motivation are higher.

Let’s leave the final word to the energy team facilitator who says, ?The only disadvantage of sub-metering is that now we can’t imagine doing without it.?

Contact Us

  • (+353)(0)1-443-3807 – IRL
  • (+44)(0)20-7193-9751 – UK

Ready to work with Denizon?